Новые инструменты в Android Market

Smart Ring Control Pro (v. 0.7.3)

Shumoapp опубликовал приложение 2012-09-05
(обновлено 2014-09-29)

Please uninstall the free version if you have installed the paid version.

This app is setting your phone ring volume depending on its position. You can set different ring volume level for when the device is horizontal with the screen up, when the device is horizontal with the screen down (on the table), and when the device is vertical (in your pocked, handbag, etc.).

The notification message is required by Android so the app won't be killed. Jelly Bean users can disable the notification by viewing the app info page, and un-check  the "Show notifications" checkbox. The app will still work afterwards.  

The app uses the accelerometer sensor of the device to recognize if the device is horizontal or vertical. The Pro (paid) version also recognizes if the device is horizontal with the screen up or the screen down, and can also use the proximity sensor to force louder ringing when in your pocket or bag.

This ring volume control application is similar in function to PocketMode for iPhone and the Pocket Mode option of the latest HTC phones. But it uses the accelerometer and proximity sensors instead of the ambient light sensor(which PocketMode uses).

You can set the app so when ring volume is changed (via volume rocker buttons), it pops up and allows you to adjust the ring volume for each phone position. Or you can lock the ring volume and not allow the volume rocker buttons change it by accident. Please  note that some third party applications may also change the ring volume (some camera applications tend to control the shutter volume when taking pictures), hence the triggering the Smart Ring Control application popup window.

Additionally, you can set the device to be muted for a period of time from within the application. For example, when you go to a movie, you can set the device to be muted for 2 hours, and it will enter silent mode for 2 hours. Right after you finish watching the movie, the device ring volume will be automatically restored to the previous settings. Or you can go to sleep and turn off the ringer until the morning when you wake up.

IMPORTANT! - posting a review that the app is not working won't help you! And it certainly isn't helping us. Please write to smartringcontrol@gmail.com what the problem is and we'll do our best to fix it.

Lucky Battery Trial (v. 1.5)

KZMS Software опубликовал приложение 2012-09-05
(обновлено 2012-09-05)

"Lucky Battery Trial" is a battery information display widget that can try one's luck.
At first, please try to "Trial version" (free).

"Installation"
1. Tap the home screen long.
2. Select the widget.
3. Select "Lucky Battery Trial".

"Functions"
1. The amount of the battery remainder is displayed by "%" and "Residual quantity image".
2. Remainder forecast time (Left) up to 0% is displayed by "Hour (h)" and "Minute (m)". (This time is calculated at the duration from the full charge.)
3. When the widget is tapped, it tries one's luck by ten stages of "100 from 10".

"Difference between free version (trial) and pay version"
As for the battery information display function, it is the same, and only the trying one's luck function is different.

Free version
It is possible to try one's luck only a day once.

Pay version
The frequency of trying luck doesn't have the limitation.
Five kinds of super-actions are generated.

"OS version"
1.6 or more

"Update information"
Ver.1.2 - Measures of trouble

Lucky Battery (v. 1.5)

KZMS Software опубликовал приложение 2012-09-05
(обновлено 2012-09-05)

"Lucky Battery" is a battery information display widget that can try one's luck.

"Installation"
1. Tap the home screen long.
2. Select the widget.
3. Select "Lucky Battery".

"Functions"
1. The amount of the battery remainder is displayed by "%" and "Residual quantity image".
2. Remainder forecast time (Left) up to 0% is displayed by "Hour (h)" and "Minute (m)". (This time is calculated at the duration from the full charge.)
3. When the widget is tapped, it tries one's luck by ten stages of "100 from 10".

"Difference between free version (trial) and pay version"
As for the battery information display function, it is the same, and only the trying one's luck function is different.

Free version
It is possible to try one's luck only a day once.

Pay version
The frequency of trying luck doesn't have the limitation.
Five kinds of super-actions are generated.

"OS version"
1.6 or more

"Update information"
Ver.1.2 - Measures of trouble

AnySoftKeyboard - Macedonian (v. 1.2)

Drakuwa опубликовал приложение 2012-09-05
(обновлено 2012-09-05)

Македонска екстензија за AnySoftKeyboard. За да работи потребно е да имаш инсталирано AnySoftKeyboard.

AnySoftKeyboard:
https://market.android.com/details?id=com.menny.android.anysoftkeyboard

Упатство за инсталација:
1. Инсталирај AnySoftKeyboard и МК екстензија
2. Активирај ASK под Language & Keyboard
3. Под Language & Keyboard > ASK Settings > Keyboards активирај барем една од трите мк тастатури
4. Смени input method од Android keyboard во AnySoftKeyboard

Default акција за менување на тастатури во ASK е swipe десно

Зошто AnySoftKeyboard?
Затоа што AnySoftKeyboard има еден куп опции за подесување, опции кои постојните македонски тастатури за android ги немаат. Вибрација/звук при пишување, едноставно менување од QWERTY на ЉЊЕРТЅ со swipe акција, речник на зборови...

DIGI Clock Widget (v. 1.19)

ForestTree опубликовал приложение 2012-09-05
(обновлено 2014-09-29)

"<b>DIGI Clock Widget</b>" is free set of five highly customizable digital time and date widgets:
2x1 widget - small
4x1 widget - wide optionally with seconds
4x2 widget - big
5x2 widget - for tablets and especially for Galaxy Note
6x3 widget - for tablets.

Features lots of customizations, like:
- widget preview during setup
- select widget click actions: tap on widget to load alarm application, widget settings or any installed application
- allows you select your preferred colors for time and date
- shadow effect with selectable color
- outlines
- locale preference, set date output in your language
- plenty of date formats + customizable date format
- show/hide AM-PM
- 12/24 hour selection
- alarm icon
- show time with seconds option (for 4x1 widget)
- widget background with selectable color and opacity from 0% (transparent) to 100% (completely opaque)
- use picture as widget background
- 40 great fonts for time and date ...
- ... or use your favorite font saved on memory card
- ready for Honeycomb, ICS and Jelly Bean Android versions
- recommended for tablets
- lock screen widget for Android Jelly Bean 4.2+

... and even more ...

<b>Problems with installation?</b>
This is home screen widget and not the application, please read the instructions on how to use the widget:
Older phones (before Android 4.0 ICS):
• To add a widget, touch and hold an empty location on a home-screen. Menu will pop-up, select Widgets.
• "Choose Widget" menu will popup. From there, find and select "DIGI Clock" widget of desired size.

Newer phones and tablets, Android 4.0 and later (Ice Cream Sandwich, Jelly Bean):
• Touch the All Apps icon on your Home screen.
• Click “Widgets” tab at the top of the screen.
• From the main Widgets screen, you can swipe left until you find "DIGI Clock”
• Touch and hold the desired widget’s icon, slide your finger where you want to place it, and lift your finger.

If there are missing "DIGI Clock" in list of widgets, try to restart phone, it might help.

To add the widget to your Android 4.2+ device's lock screen, simply swipe to the left-most page of your lock screen and touch the big "+" icon. Then, select "DIGI Clock" add the widget. You can make this the primary lock screen widget, replacing the default clock, by first touching-and-holding it and then dragging it horizontally to the very rightmost position.

<b>NOTICE</b>
Do NOT move this app to SD-card! Widgets won't work once you move them to SD card.
Please exclude this widget from any task killers, this will resolve the time freezing issue in most instances.

When you want help us with localization of "DIGI Clock Widget" to your language, visit please this site:
https://crowdin.net/project/digi-clock-widget

Thanks for using DIGI Clock Widget!

TilePlanner (v. 1.1)

Dralor опубликовал приложение 2012-09-05
(обновлено 2012-09-05)

Tileplanner allows you to calculate just how many tiles you need for your new floor or wall. The app can handle any area composed of rectangles, and calculates the optimal amount of tiles you need to buy, and approximately how much you'll have left in scraps. You can use regular tiles or tiles with ridges that fit into eachother (for wooden floors, for example), and allow the app to use scraps from previously used tiles. Finally, you can save your designs so you won't have to draw it again each time.

AsoAlarm (v. 1.6)

asonimha опубликовал приложение 2012-09-04
(обновлено 2012-09-04)

Aso Alarm

Easy-to-use alarm application.



Type description of the alarm.
1. Preset alarm: Once the alarm rings, the alarm disappears.
           Ringing a few minutes later.
           In the Alarm List, preset alarms are sorted by alarm time order.
           Set on the Preset tab.

2. Timeset alarm: Once the alarm ring, the alarm does not go away.
          Simply check the button to activate, deactivate.
          In the Alarm List, timeset alarm are sorted by time order of adding to the Alarm List.
          Set on the Time Set tab.


Application Description

1. Alarm List tab:

   - short touch on the item -> Go to the Edit page.
   - Long touch on the item -> Delete an individual.
   - Options Menu
      - Delete: go to the delete list page.

2. Presets Tab
   - short touch on the item -> the preset alarm is added to the Alarm List.
   - Options Menu
      - Add: Add new preset alarm to the preset list.
      - Delete: Delete the preset alarm.
      - Reset: Initializes the list of preset alarms.
      - Setting: Setting for preset alarms.

3. Time set Tab
   - Time Set: time settings.
   - Repeat: Repeat for days of week.
   - Sound: The sound and vibration settings.
   - Tune: select an alarm tune. (ringtone or Mp3)
   - Volume: Adjusts the alarm volume.
   - Fade mode: Fade in/out setting.
   - Snooze: setting for default snooze time.  

4. Ring
   - Snooze button.
   - drag the scroll bar on the bottom : off the alarm

AnUAE4All (v. 1.1.9)

Locnet опубликовал приложение 2012-09-04
(обновлено 2012-09-04)

An UAE4All port for Android. UAE4All is an Amiga 500 emulator originally from Chui mainly for playing old Amiga games. Like the original UAE4All, some games are rather tricky to make it work, so basically only suitable to experienced UAE4All user.

IMPORTANT: Require your 512k Kickstart ROM in .rom format, and Amiga floppy disk image in .adf format. Make sure your sdcard can be accessed through /sdcard.

We appreciate any rating, comments and suggestions, but in case you need some answer, please check description below, check FAQ on homepage, or email us directly (android.locnet@gmail.com).

This app is based on various UAE4All ports and AnDOSBox, for GPL enquiries please email to developer.


Features
========
- Work in Fast mode or Compatible mode
- Support "1M Chip" or "512k Chip + 512k RAM" memory config
- Support multiple savestates in both Fast mode and Compatible mode
- Emulate from 1 to 4 floppy drives
- Select between 200/240/256 scanline
- Support Hi-Res mode
- Portrait or Landscape mode with free resize
- Support Sound
- Work with Software and Hardware keyboard
- Support entering special keys like Ctrl, ESC and Function keys
- Support Virtual TrackPad, Virtual Joystick, and Pen Mouse mode


Limitations for this version
============================
- Require 512k ROM.
- Compatibility is limited (similar to other UAE4All ports).
- Floppy only, not support harddisk.


Known Issues
============
- On some device it failed to call out the software keyboard. In this case, try holding the "menu" hardware key, or turn on (menu->input mode->show keyboard fix).
- Some program will not compatiblity with Pen mode, please use Trackpad mode in this case.

General Tips
============
- Require 512k Kickstart ROM, have better compatibility with v1.3 ROM.
- Check out UAE4All compatibility list from internet.
- If "Disk Error" is reported and cannot proceed, restart the emulator and try again.
- If have problem running some program, try switch to another emulation (core) mode.
- Savestate will bind to the disk inserted in Floppy Drive 1 BEFORE the emulator started, disk change after that will not change the binding.
- Use "menu->buttons->show buttons" to check hidden buttons and joystick area.
- To avoid accidental mouse click, switch to Joystick mode/Scroll Screen mode, or turn off "Tap screen as Click" from "menu->input mode".
- Select change floppy then press Back without selecing a disk file will eject a disk from the floppy drive.
- Use Right-Alt instead of Left-Alt (or turning off "menu->input mode->map left-alt key") to type special letters on physical keyboard.
- To use D-Pad as keyboard arrows, make sure Joystick Keys is not in D-Pad mode ("menu->settings->joystick keys").
- To use Button Mapper, make sure Joystick Keys is disabled.
- Use our "GameKeyboard" or "Flit Keyboard" with it's Extra Plugin as companion if needed.


Joystick Tips
=============
See FAQ on homepage.

STL File Viewer (free) (v. 1.41)

Architecture3D опубликовал приложение 2012-09-04
(обновлено 2012-09-04)

If you are already up to speed with STL files (used for rapid prototyping and 3D printing) try out this free Android app which lets you view, rotate and check your STL files.

If you run an RP bureau or 3D scanning, or manufacture RP hardware, and you would like to see my point cloud and STL file viewer branded as your app, for your clients to use and for you to distribute, please let me know.

Email me at bt@architecture3d.co.uk and I will be happy to talk through the options.

Features

* Built in file browser

* View Binary and ASCII STL files, with smooth pan, rotate and zoom (drag and pinch)

* Works in portrait or landscape mode

* Show the facets, vertices, XYZ axes and a bounding box or any combination

* Select model colour

* Save a screenshot of your model to a PNG file

* View model stats (file name, type, size, number of facets, volume, loading time in milliseconds)

* User settings automatically saved

* Remembers last folder viewed and returns there on startup

* Invert normals.

This version of the app is now frozen, but the Pro version is now free! All future enhancements will appear only in the Pro version, which does everything this one does but reads point clouds too and converts ASCII files to binary.

InclinationBrowser (v. 1.0)

En.Yamada опубликовал приложение 2012-09-04
(обновлено 2012-09-04)

Browser scroll by tilting the device. When operating with one hand and on trains, etc., if cumbersome to repeat the scroll with your index finger might be good.

[List of features]
- detects the tilt and scroll horizontally and vertically. Supporter, you can have next.
- Bookmarks are shared with a standard browser.
- A standard browser from the "Share Link" to start.
- Function as a browser is vulnerable. You may wish to use as an adjunct to such cumbersome when scrolling pages in a standard browser.

[Items can be configured]
- scrolling speed - with or without scrolling
- with or without horizontal scrolling
- sensitivity of the sensor
- the standard angle
- whether by adding the magnitude of the tilt speed
- scrolling direction reversal
- side-scrolling direction reversal Comment How easy as
Because I made it anyway. Request, such reports can not thank you operate. Moreover, since there are models that can be tested so long as, if not, you're operating with only sorry.

[Operating conditions]
than Android 2.2

[tested]
Toshiba T-01C