www.android-online.ru РазработчикиXtreme

Приложения разработчика Xtreme в Android Market

Критерий сортировки:
1-3 из 3
Иконка для Your location Sender + SMS 3.1.0

Your location Sender + SMS (v. 3.1.0)

Xtreme опубликовал приложение 2013-01-09
(обновлено 2015-04-08)

[Your location Sender + SMS] is an application which transmits periodically a present location of you (where are you?) by e-mail.
Moreover, it is also possible to perform e-mail or SMS transmission by SMS reception from the permitted phone number.

Even when GPS cannot be used, since positioning is carried out from a network, a near present location is always known.
(If "Use wireless networks" alowed)
There are also a function which transmits your present location immediately by one click, and a function which displays your present location and transmits.
And send histories are saved in this application.

In this application, the following setup is possible.
1. E-mail subject
2. E-mail send interval (15 minutes - 8 hours or Send reservation time only)
3. E-mail send prohibition time
4. Positioning accuracy (It can set up to 20m-5000m Or ignore accuracy. E-mail is sent when position information more detailed than a preset value is able to be acquired.)
5. Ignore last sent location (Positioning is repeated when the current position has not changed at all from the position which sent by e-mail last time. When a new position still cannot be acquired, it becomes "Your location is unavailable..." treatment.)
6. Send reservation time (5 times)
7. E-mail addressee (5 persons).
8. Action by SMS reception(Chose action at time of SMS reception. This action occur only when Permit SMS is effective.)
9. SMS keyword (If keyword specified here is received by SMS, e-mail or SMS will be sent. When a keyword is blank, if SMS is received, e-mail or SMS will be sent unconditionally.)
10. SMS Permitted phone number(5 persons. However, it is necessary to certainly set up to send e-mail or SMS by SMS reception. )
11. With alert(If you check this, Alert by SMS reception.)
12. Use Sensors(GPS only or GPS and network)
13. SMS Message format(Google Maps URL or Measured values)

*Caution
- Positioning accuracy may produce the error which is not assumed depending on the sensor and use network of a terminal.
- Since an e-mail transmitting interval and the time when e-mail is actually sent hold down battery consumption, they may have an error of about a maximum of 15 minutes.
- Reside fixed transmission permanently during execution from a viewpoint of privacy protection at a task tray.
- If you use an application of Task Killer, please exclude this application.
- At the time of positioning, if a radio wave state is bad, e-mail transmission may go wrong.
- When a certain damage arises by use of this application, please understand beforehand that the developer cannot take responsibility.

**********************
Directions for use
**********************
1. Set a Gmail account and password.
2. Set an e-mail addressee.
3. Set an e-mail send interval.
4. Set a send prohibition time (Optional).
5. Set a send reservation time(Optional).
6. Check a [Service Start] and open [Your location Sender + SMS] again.
7. If send e-mail or SMS by SMS reception, Check a [Permit SMS] and set [SMS keyword] and [Permitted number].

**********************
Use for
**********************
- Simple GPS Logger
- Waiting with people.
- Logging of your behavior range.
- Always tell someone your present location.
- It is easy to be found by notifying your present location from usually at the time of disaster etc.
- It is easy to discover when a cellular phone is lost.
- etc...

**********************
Support site
**********************
http://xtreme-dev.com/

US$2.99
Иконка для Reversi-ZantetsuShin 1.1.1

Reversi-ZantetsuShin (v. 1.1.1)

Xtreme опубликовал приложение 2012-12-12
(обновлено 2012-12-12)

ZantetsuShin is based on Reversi.
Background of the board is painted by Fantastic CG.
You can change CPU/HUMAN mode.
BOMB mode is special.
If BOMB mode is turned ON, When You or CPU put a stone, surrounding stones will be destroyed at random.

Бесплатно
Иконка для SedoriScanner 3.1.0

SedoriScanner (v. 3.1.0)

Xtreme опубликовал приложение 2010-09-09
(обновлено 2012-08-06)

Sedoriscanner is the Sedori supportive tool.
Not only books but the scan of a game or DVD is possible.
Moreover, a high-speed scan is also possible by installing the QR Code scanner separately.

You scan the bar code of books with a camera, and acquire information from Amazon Web Service. (Free registration is required. Refer to the web page for a registration method.Masnual's url is http://xtreme-dev.com/sedori.pdf )
After Version 1.2, it corresponded to the direct input of EAN13 and ASIN.

* A scanning function corresponds only EAN13 format.
When damage arises by use of this application, please understand beforehand that the developer cannot take responsibility.

*************
Directions for use
*************

1. Register with Amazon Web Service.
(http://www.thoe.net/dev/sedori.pdf Reference)

2. If it registers, Access Key ID and Secret Access Key will be registered into a SedoriScanner.

3. Scan the (top of two) bar code of the back cover of a book.
(Or the input of EAN13 or ASIN is performed)

4. Information is displayed on a screen.

5. When preservation is chosen, it is saved by a file name called /sdcard/SedoriScanner/yyyymmdd.txt.
Only one file will be generated on the 1st, and a file is added to a file when two or more books are scanned.

* Encoding of a file is UTF-8. Please have a look by the text editor corresponding to UTF-8.

*************
Developer operation check model
*************
HT-03A(Android 1.6, 2.2)SO-01B Xperia X10(Android 1.6, 2.1)

If it is a model which satisfies the following requirements, it should operate generally.
+ those with 1.6 or more Android(s)+ auto-focus camera loading + network communication (wifi and 3G -- which)

*************
SedoriScanner specification
*************

1. Code classification for search

The [time of a bar code scan] It is only a bar code of +EAN13 (Japan JAN) form.
+ ISBN supports the thing (ISBN-13) of 13 figures currently written in EAN13 form.
+ Not support UPC.
+ Not support other standard codes.


The [time of a manual input] In @EAN13 input, it is specification equivalent to the time of + bar code scan. Only a numerical value can be inputted.

ASIN which is defined by +Amazon in @ASIN input is inputted. A numerical value and the alphabet can be inputted.
It is necessary to know ASIN in advance by Web etc.

2. Search target product item

The [time of a bar code scan] They are only + books. The bar code currently written in EAN13 form is an object. It is a bar code which starts with 978.

The [time of a manual input] In @EAN13 input, they are only + books. The bar code currently written in EAN13 form is an object. It is a bar code which starts with 978.

All the goods which exist in +Amazon in @ASIN input can be searched. It is necessary to know ASIN in advance.

3. The numerical value of 13 figures which starts with +978 in keystroke [time of manual input] @EAN13 input is inputted. A numerical abbreviation cannot be performed.
Please omit "-"
ISBN-10 is not supported.

ASIN which is defined by +Amazon in @ASIN input is inputted. A numerical value and the alphabet can be inputted.
A capital letter or a small letter is also possible for the alphabet. [ABC1234] -> [abc1234]

4. Two or more search present condition supports [ neither the bar code scan nor the keystroke ] two or more search.

* ZXing is used for decoding of a bar code.
ZXing is distributed with the Apache 2.0 license. Please refer to the following URL for the details of ZXing ("Zebra Crossing").
http://code.google.com/p/zxing/

*************
Support
*************
http://xtreme-dev.com/

US$3.90
Страница:  1