Приложения разработчика UBNTEK INC в Android Market

uYcam: IP Camera Viewer (v. 2.0)

UBNTEK INC опубликовал приложение 2013-01-10
(обновлено 2013-01-10)

uYcam allows the user to remotely monitor live video feed with an incredibly intuitive touch screen user interface for Y-cam network cameras. Unlike most IP camera applications; it not only gives the user professional monitoring capabilities with face and motion detect but enables to quickly and easily add new models right after user’s request through our open architecture software.
Just download and click uYcam to view what your camera’s lens see virtually from anywhere with Wi-Fi coverage or even cellular networks.

* Main Features
▶ Unlimited number of cameras can be configured
▶ Directly access to video stream from your camera. No NVR or 3rd party server is required
▶ Automatically capture images by in-app motion and face detection
▶ Quickly and easily add new models with reload button
▶ Friendly navigate cameras with the variety of portrait and landscape modes
▶ Enable or disable Upside down
▶ Clone easily camera settings
▶ Reorder camera lists
▶ Enable or disable Auto-Lock
▶ Passcode Lock
▶ Compatible with Dynamic DNS services
▶ Take snapshots or share via email, Facebook and/or Twitter.

* In-App Billing Features for Multi-Views
▶ Easily view multiple feeds simultaneously on a screen with layout controls (2, 4, 6, 9 views)
▶ Last layout they were at automatically saved (initial layout is 4)
▶ Switch back and forth between multi cameras screen

* Supported Cameras
- Common: Black, Bullet, Knight, White

* Note
- Before you can control your camera(s) remotely over 3G/4G/Edge/other Wi-Fi networks, you need to setup your router to allow incoming traffic. You should read your camera’s setup manual regarding port forwarding. For more information, please see www.portforward.com or www.dyndns.org
- The response time of PTZ control and multiple cameras view depends on the network and/or your device itself and/or camera capability which may cause a little bit of delay in feedback

If you have any questions or comments, or you would like to request that we support additional camera models, please send an email to sales@ubntek.com

uAxisCam: Audio & Video (v. 2.0)

UBNTEK INC опубликовал приложение 2013-01-09
(обновлено 2013-01-09)

uAxisCam allows the user to remotely monitor live video and audio feeds with an incredibly intuitive touch screen user interface for Axis network cameras. Unlike most IP camera applications; it not only gives the user professional monitoring capabilities with audio, face and motion detect, but enables to quickly and easily add new models right after user’s request through our open architecture software.
Just download and click uAxisCam to view what your camera’s lens see virtually from anywhere with Wi-Fi coverage or even cellular networks.

* Main Features
▶ Unlimited number of cameras can be configured
▶ Directly access to audio and video streams from your camera. No NVR or 3rd party server is required
▶ Automatically capture images by in-app motion and face detection
▶ Pan and Tilt controls with overlay buttons(max 8 directions)
▶ Optical zooming option if the user's camera has the optics lens
▶ Switch IR-LED illumination for night vision on/off
▶ Control Presets at its original center location and predefined up to 8 spots
▶ Activate or deactivate output port for connecting external devices
▶ Quickly and easily add new models with reload button
▶ Friendly navigate cameras with the variety of portrait and landscape modes
▶ Resolution control (QVGA, VGA, SVGA)
▶ Enable or disable Upside down
▶ Enable or disable Mirror
▶ Enable or disable Invert Pan Tilt
▶ Clone easily camera settings
▶ Reorder camera lists
▶ Enable or disable Auto-Lock
▶ Passcode Lock
▶ Compatible with Dynamic DNS services
▶ Take snapshots or share via email, Facebook and/or Twitter.

* In-App Billing Features for Multi-Views
▶ Easily view multiple feeds simultaneously on a screen with layout controls (2, 4, 6, 9 views)
▶ Last layout they were at automatically saved (initial layout is 4)
▶ Switch back and forth between multi cameras screen

* Supported Cameras
- Axis Common: 206, 207, 209MFD, 210, 211, 212PTZ, 214PTZ, 215PTZ, 216FD, 221, 223, 225FD, M1011W, M1054, M1031W, M5013, M5014, P1346, P3304, P3346, Q6034
- Axis 2120,2130: 2120, 2130R
- Axis 5512: P5512
- Axis 5532,5534: P5532, P5534
- Axis Encoder Camera 1 ~ 6: 240Q, 241Q, 2400, Q7401, Q6032
- Axis Encoder Quad: 240Q, 241Q, Q7401, Q6032

* Note
- Before you can control your camera(s) remotely over 3G/4G/Edge/other Wi-Fi networks, you need to setup your router to allow incoming traffic. You should read your camera’s setup manual regarding port forwarding. For more information, please see www.portforward.com or www.dyndns.org
- The response time of PTZ control and multiple cameras view depends on the network and/or your device itself and/or camera capability which may cause a little bit of delay in feedback

If you have any questions or comments, or you would like to request that we support additional camera models, please send an email to sales@ubntek.com
email to sales@ubntek.com.

uAllnetCam: IP Camera Viewer (v. 1.8)

UBNTEK INC опубликовал приложение 2013-01-09
(обновлено 2013-01-09)

uAllnetCam allows the user to remotely monitor live video feeds with an incredibly intuitive touch screen user interface for Allnet network cameras. Unlike most IP camera applications; it not only gives the user professional monitoring capabilities with face and motion detect but enables to quickly and easily add new models right after user’s request through our open architecture software.
Just download and click uAllnetCam to view what your camera’s lens see virtually from anywhere with Wi-Fi coverage or even cellular networks.

* Main Features
▶ Unlimited number of cameras can be configured
▶ Directly access video streams from your camera. No NVR or 3rd party server is required
▶ Automatically capture images by in-app motion and face detection
▶ Pan and Tilt controls with overlay buttons(max 4 directions)
▶ Quickly and easily add new models with reload button
▶ Friendly navigate cameras with the variety of portrait and landscape modes
▶ Resolution control (QVGA, VGA)
▶ Enable or disable Upside down
▶ Enable or disable Mirror
▶ Enable or disable Invert Pan Tilt
▶ Clone easily camera settings
▶ Reorder camera lists
▶ Enable or disable Auto-Lock
▶ Passcode Lock
▶ Compatible with Dynamic DNS services
▶ Take snapshots or share via email, Facebook and/or Twitter.

* In-App Billing Features for Multi-Views
▶ Easily view multiple feeds simultaneously on a screen with layout controls (2, 4, 6, 9 views)
▶ Last layout they were at automatically saved (initial layout is 4)
▶ Switch back and forth between multi cameras screen

* Supported Cameras
- All2205: Allent2205
- All2250: Allnet2250
- All2281: Allnet2281
- All2282: Allnet2282
- All2297: Allnet2297 (without PT)
- All2298: Allnet2298 (without PTZ)

* Note
- Before you can control your camera(s) remotely over 3G/4G/Edge/other Wi-Fi networks, you need to setup your router to allow incoming traffic. You should read your camera’s setup manual regarding port forwarding. For more information, please see www.portforward.com or www.dyndns.org
- The response time of PTZ control and multiple cameras view depends on the network and/or your device itself and/or camera capability which may cause a little bit of delay in feedback

If you have any questions or comments, or you would like to request that we support additional camera models, please send an email to sales@ubntek.com