Приложения разработчика PhonePhreak Software в Android Market

Pocket Keylock: PocketSensor (v. 1.34)

PhonePhreak Software опубликовал приложение 2011-12-02
(обновлено 2013-11-18)

PocketSensor uses your phone's built-in proximity sensor to automatically lock the phone when it is put in a pocket. With PocketSensor, you can forget about the power button - and about the lockscreen, too!

With PocketSensor, once you put the phone in your pocket, the screen and the keys will lock automatically. And once you take it out of the pocket, the screen and the keys are unlocked automatically - with no finger swipe etc. needed...

★★★ PocketSensor is the only pocket keylock app to use native methods for both proximity check and keylock. No granting of administrator rights required. Easy install & uninstall. No extra battery usage. ★★★

NEW: You can now select to have the lockscreen enabled for manual use. This means that the lockscreen will appear each time you have locked the device using the power button, but will not come on if the phone has been put in a pocket unlocked. That way, the lockscreen will always come on when the phone has been locked by you (or has been lying around unattended), but never if you take it out of the pocket after you have put it there yourself.

Features:

• In order to prevent accidental triggering when you're holding the phone with both hands, the automatic keylock deactivates when the display is in landscape mode. (NEW: This feature can now be disabled)

• With PocketSensor active, you can still lock/unlock the phone manually.

• When the phone is not in a pocket, any key will unlock the phone completely - bypassing the lock screen. (NEW: you can now choose to keep the lockscreen)

• Also when it has been locked manually, the phone will still unlock automatically.

• When in a pocket, all keys - including the power key - will be locked. (Perfect for those phones where the power key gets pressed accidentally when in a pocket...)

• Autostart on bootup (only if Automatic Keylock was last enabled) (Note: if you have PIN entry disabled, the lockscreen will appear once after switching on the device, then never again...)

NOTE: PocketSensor makes use of the device's built-in proximity sensor whose sensitivity cannot be configured. The sensor reacts best to uniform surfaces. Depending on the exact position of the proximity sensor, the screen may lock while you are attempting to access the notification bar. In this case, try accessing the notification bar from its other end.


PLEASE NOTE: Does not work on phones made by ZTE or Hero


Problems or suggestions? Please email!


Tags: lock,pocket,detect,detection,screenlock,lockscreen,screen,keylock,key,keys,sensor,display,sleep,sleepmode,mode,on,off

PocketSensor - FREE TRIAL (v. 1.1)

PhonePhreak Software опубликовал приложение 2011-12-02
(обновлено 2011-12-02)

PocketSensor uses your phone's built-in proximity sensor to automatically lock the phone when it is put in a pocket. With PocketSensor, you can forget about the power button - and about the lock screen, too!

With PocketSensor, once you put the phone in your pocket, the screen and the keys will lock automatically. And once you take it out of the pocket, the screen and the keys are unlocked automatically - with no finger swipe etc. needed...

Features:

- In order to prevent accidental triggering when you're holding the phone with both hands, the automatic keylock deactivates when the display is in landscape mode.

- With PocketSensor active, you can still lock/unlock the phone manually.

- When the phone is not in a pocket, any key will unlock the phone completely - bypassing the lock screen.

- Also when it has been locked manually, the phone will still unlock automatically. (Manual locking is not available when screen is in landscape mode.)

- When in a pocket, all keys - including the power key - will be locked. (Perfect for those phones where the power key gets pressed accidentally when in a pocket...)


(NOTE: Depending on the exact position of the proximity sensor, the screen may lock while you are attempting to access the notification bar. In this case, access the notification bar from its other end.)


FREE TRIAL VERSION: The Automatic Keylock will stay active for a limited time only. You can reactivate the Automatic Keylock from the PocketSensor screen. (In the Trial Version, autostart on bootup is disabled.)

PLEASE NOTE: Before installing the full version, please disable the Automatic Keylock!


Problems or suggestions? Please email!


Tags: lock,pocket,pocket lock,screenlock,lockscreen,screen lock,keylock,key lock,keys,screen,sensor,display,sleep,sleep mode,mode

SmartLight - FREE TRIAL (v. 1.28)

PhonePhreak Software опубликовал приложение 2011-10-22
(обновлено 2013-09-14)

Tired of the display backlight suddenly dimming when you are in the middle of something? Wouldn't it be nice if your phone/tablet knew when you needed the light and when not? With SmartLight, the light will stay on as long as you have an app window open - and it will switch off once you return to the Home Screen or to the Applications Menu. No more tapping the screen to keep the light on!

★★★ On compatible phones and tablets (see below), SmartLight works right out of the box - no configuration (or editing of lists) required! ★★★

FOR HTC, SONY, SAMSUNG AND MOTOROLA PHONES AND TABLETS - AND GOOGLE NEXUS 7. (Also supports other models if you have one of the following launchers installed: adw Launcher, GO Launcher Ex, Launcher Pro, Nova Launcher, Zeam Launcher.)
NOTE: Currently, GO Launcher Tab is not supported. I am working on a fix...)

Features:

• With SmartLight, the display backlight stays on as long as you have an app open.

• Once you return to the Home screen or to the Applications menu, the backlight will switch off as usual.

• For maximum effect, we recommend setting the display timeout to the minimum of 15 seconds. (Go to Settings > Display > Screen timeout).


FREE TRIAL VERSION: The Automatic Backlight will stay active only for a limited time after checking "Enable Automatic Backlight" in the SmartLight screen. You can always reactivate the Automatic Backlight by checking "Enable Automatic Backlight" there again.


NOTE: SmartLight is fully compatible with WidgetLocker, NoLED and Go SMS Pro. For technical reasons though, the light will not stay on in the configuration windows of these apps.

(NOTE: When running with adw, GO Launcher Ex or Launcher Pro, the light will not stay on in the Contacts app.)


Problems or suggestions? Please email!


Tags: keep,backlight,light,display,screen,automatic,control,power,manager,management,stay,always,dim,on,off,no,sleep,mode

Automatic Backlight:SmartLight (v. 1.1)

PhonePhreak Software опубликовал приложение 2011-10-22
(обновлено 2011-10-22)

Tired of your phone's display backlight suddenly dimming when you are in the middle of something? Don't you wish your phone knew when you needed the light - and when you don't? Now don't you need the light first and foremost WHILE YOU ARE IN AN APP?

With SmartLight, the light stays on as long as you have an app open. And once you return to the Home screen or to the Applications menu, the backlight will switch off as usual (i.e. after the period selected in Settings > Display > Screen timeout).

FOR SAMSUNG AND HTC PHONES USING THE DEFAULT HOMESCREEN (SAMSUNG TOUCHWIZ / HTC SENSE): e.g. Samsung Galaxy S, HTC Desire.

NO 3RD PARTY HOMESCREENS/LAUNCHERS SUPPORTED. WILL NOT WORK WITH A CUSTOM LOCKSCREEN.

PLEASE NOTE: Before installing the full version, please disable the Automatic Backlight!


Problems or suggestions? Please email!


Tags: backlight,light,display,screen,automatic,control,power,manager,management,stay,always,dim,on,off,no,sleep,mode,screebl