Приложения разработчика Nick Copeland в Android Market

Augur-1 Synth (v. 1.0.15)

Nick Copeland опубликовал приложение 2011-10-21
(обновлено 2011-10-21)

This emulates an 80s classic analogue mono synth, the emulator has dual voice for multitouch but that is not the default setting. It has dual oscillator, noise, lfo, mixer, filter and a pair of envelope generators. The app supports pressure sensitive touch screens, X/Y accelerometer for pitch and mod wheel, multitouch and zooming interface facilities. The interface has options for fat-finger, analogue filters and rich oscillators however these will consume extra CPU cycles. The interface also has a full piano keyboard setting.
There is an emulator 'Unison' switch which will play both voices on a single note to pad out the sound.

The same author has an Augur-52 which is the same engine with a stereo flanger on the output stage.

Interface zooming can be done either with the trackball (Nexus/HTC have them) or enable multitouch via the menu then tap the screen with two fingers at the same time - this will zoom the interface in/out. If you tap with two fingers but keep them held you can move the screen around. This kind of helps out with the dense graphics.

Patches are saved on the SD card along with factory sounds, there is an export and import option to exchange patches.

The emulator will, per default, attempt to run with a set of options that will give reasonable quality and the lowest possible latency/lag. The quality of the audio can be tuned with the menu options however the lowest possible latency for pretty much all Android devices is currently 42ms, on my HTC Desire it is 70ms. If you understand what this means then the value might seem quite high but the app is still a lot of fun.

Twitter @bristolaudio

Bristol PolySynth (v. 1.0.15)

Nick Copeland опубликовал приложение 2011-10-17
(обновлено 2011-10-17)

This emulates a 80s classic analogue poly synth, the emulator is just dual voice for multitouch. It has single oscillator, noise, lfo, mixer, filter and a pair of envelope generators. The app supports pressure sensitive touch screens, X/Y accelerometer for pitch and mod wheel, multitouch and zooming interface facilities. The interface has options for fat-finger, analogue filters and rich oscillators however these will consume extra CPU cycles. The interface also has a full piano keyboard setting.
There is an emulator 'Unison' switch which will play both voices on a single note to pad out the sound.

The same author has an Augur-52 which is the same engine with a stereo flanger on the output stage.

Interface zooming can be done either with the trackball (Nexus/HTC have them) or enable multitouch via the menu then tap the screen with two fingers at the same time - this will zoom the interface in/out. If you tap with two fingers but keep them held you can move the screen around. This kind of helps out with the dense graphics.

Patches are saved on the SD card along with factory sounds, there is an export and import option to exchange patches.

The emulator will, per default, attempt to run with a set of options that will give reasonable quality and the lowest possible latency/lag. The quality of the audio can be tuned with the menu options however the lowest possible latency for pretty much all Android devices is currently 42ms, on my HTC Desire it is 70ms. If you understand what this means then the value might seem quite high but the app is still a lot of fun.

Twitter @bristolaudio

Juniper Polysynth (v. 1.0.15)

Nick Copeland опубликовал приложение 2011-10-11
(обновлено 2011-10-11)

This emulates an 80s classic analogue poly synth, the emulator is just dual voice for multitouch. It has single oscillator, noise, lfo, mixer, filter and an envelope generator. The app supports pressure sensitive touch screens, X/Y accelerometer for pitch and mod wheel, multitouch and zooming interface facilities. The interface has options for fat-finger, analogue filters and rich oscillators however these will consume extra CPU cycles. The interface also has a full piano keyboard setting.
There is an emulator 'Unison' switch which will play both voices on a single note to pad out the sound.

Interface zooming can be done either with the trackball (Nexus/HTC have them) or enable multitouch via the menu then tap the screen with two fingers at the same time - this will zoom the interface in/out. If you tap with two fingers but keep them held you can move the screen around. This kind of helps out with the dense graphics.

Patches are saved on the SD card along with factory sounds, there is an export and import option to exchange patches.

The emulator will, per default, attempt to run with a set of options that will give reasonable quality and the lowest possible latency/lag. The quality of the audio can be tuned with the menu options however the lowest possible latency for pretty much all Android devices is currently 42ms, on my HTC Desire it is 70ms. If you understand what this means then the value might seem quite high but the app is still a lot of fun.

Twitter @bristolaudio

OBx Synthesizer (v. 1.0.15)

Nick Copeland опубликовал приложение 2011-10-06
(обновлено 2011-10-06)

An 80s classic analogue poly synth, the emulator is just dual voice for multitouch. It has dual oscillator, noise, lfo, mixer, filter and a pair of envelope generators. The app supports pressure sensitive touch screens, X/Y accelerometer for pitch and mod wheel, multitouch and zooming interface facilities. The interface has options for fat-finger, analogue filters and rich oscillators however these will consume extra CPU cycles. The interface also has a full piano keyboard setting.
There is an emulator 'Unison' switch which will play both voices on a single note to pad out the sound.

Interface zooming can be done either with the trackball (Nexus/HTC have them) or enable multitouch via the menu then tap the screen with two fingers at the same time - this will zoom the interface in/out. If you tap with two fingers but keep them held you can move the screen around. This kind of helps out with the dense graphics.

Patches are saved on the SD card along with factory sounds, there is an export and import option to exchange patches.

The emulator will, per default, attempt to run with a set of options that will give reasonable quality and the lowest possible latency/lag. The quality of the audio can be tuned with the menu options however the lowest possible latency for pretty much all Android devices is currently 42ms, on my HTC Desire it is 70ms. If you understand what this means then it might seem quite high but the app is still a lot of fun.

Twitter @bristolaudio

Augur-52 Synth (v. 1.0.15)

Nick Copeland опубликовал приложение 2011-10-01
(обновлено 2011-10-01)

This version of the bristol augur synthesizer is in stereo with a flanger effect to widen out the sound,

This is an emulator of a 80s classic analogue poly synth, the emulator is just dual voice for multitouch. It has dual oscillator, noise, lfo, mixer, filter and a pair of envelope generators. The app supports pressure sensitive touch screens, X/Y accelerometer for pitch and mod wheel, multitouch and zooming interface facilities. The interface has options for fat-finger, analogue filters and rich oscillators however these will consume extra CPU cycles. The interface also has a full piano keyboard setting.
There is an emulator 'Unison' switch which will play both voices on a single note to pad out the sound.

Interface zooming can be done either with the trackball (Nexus/HTC have them) or enable multitouch via the menu then tap the screen with two fingers at the same time - this will zoom the interface in/out. If you tap with two fingers but keep them held you can move the screen around. This kind of helps out with the dense graphics.

Patches are saved on the SD card along with factory sounds, there is an export and import option to exchange patches.

The emulator will, per default, attempt to run with a set of options that will give reasonable quality and the lowest possible latency/lag. The quality of the audio can be tuned with the menu options however the lowest possible latency for pretty much all Android devices is currently 42ms, on my HTC Desire it is 70ms. If you understand what this means then the value might seem quite high but the app is still a lot of fun.

Twitter @bristolaudio

uSonic V Synth (v. 1.0.15)

Nick Copeland опубликовал приложение 2011-09-29
(обновлено 2011-09-29)

This is an emulator of the muSonic 5, a synthesizer originally designed by one of the Moog engineers Gene Zumchek (possibly the real father of modern synths), he proposed then eventually designed and built the prototype Mini Moog, the first fixed configuration portable monophonic. After leaving Moog he created the muSonic who themselves eventually bought the bankrupt remains of Moog and released this synth with a few changes as the Moog Sonic-6. The dual LFO configuration is very rich and there are lots of modulation possibilities as well as direct mix and in this emulator some mild stereo reverb.

Interface zooming can be done either with the trackball (Nexus/HTC have them) or enable multitouch via the menu then tap the screen with two fingers at the same time - this will zoom the interface in/out. If you tap with two fingers but keep them held you can move the screen around. This kind of helps out with the dense graphics.

Patches are saved on the SD card along with factory sounds, there is an export and import option to exchange patches.

The emulator will, per default, attempt to run with a set of options that will give reasonable quality and the lowest possible latency/lag. The quality of the audio can be tuned with the menu options however the lowest possible latency for pretty much all Android devices is currently 42ms, on my HTC Desire it is 70ms. If you understand what this means then the value might seem quite high but the app is still a lot of fun.

Twitter @bristolaudio

Augur-5 Synth (v. 1.0.15)

Nick Copeland опубликовал приложение 2011-09-29
(обновлено 2011-09-29)

This emulates an 80s classic analogue poly synth, the emulator is just dual voice for multitouch. It has dual oscillator, noise, lfo, mixer, filter and a pair of envelope generators. The app supports pressure sensitive touch screens, X/Y accelerometer for pitch and mod wheel, multitouch and zooming interface facilities. The interface has options for fat-finger, analogue filters and rich oscillators however these will consume extra CPU cycles. The interface also has a full piano keyboard setting.
There is an emulator 'Unison' switch which will play both voices on a single note to pad out the sound.

The same author has an Augur-52 which is the same engine with a stereo flanger on the output stage.

Interface zooming can be done either with the trackball (Nexus/HTC have them) or enable multitouch via the menu then tap the screen with two fingers at the same time - this will zoom the interface in/out. If you tap with two fingers but keep them held you can move the screen around. This kind of helps out with the dense graphics.

Patches are saved on the SD card along with factory sounds, there is an export and import option to exchange patches.

The emulator will, per default, attempt to run with a set of options that will give reasonable quality and the lowest possible latency/lag. The quality of the audio can be tuned with the menu options however the lowest possible latency for pretty much all Android devices is currently 42ms, on my HTC Desire it is 70ms. If you understand what this means then the value might seem quite high but the app is still a lot of fun.

Twitter @bristolaudio

Mini Synthesizer (v. 1.0.15)

Nick Copeland опубликовал приложение 2011-09-03
(обновлено 2011-09-03)

The is an emulation of a Moog synthesiser, three oscillators, noise, mixer, filter and two envelope generators fully emulated in software with modulation from third oscillator and/or Noise/S&H. The app supports pressure sensitive touch screens, X/Y accelerometer for pitch and mod wheel, multitouch and zooming interface facilities. The original was a monophonic instrument however the emulator can operate as a polyphonic (duophonic) synth via multitouch when it is enabled. The interface has options for fat-finger, analogue filters and rich oscillators however these will consume extra CPU cycles. The interface also has a full piano keyboard setting.

So this is not Moog and it isn't a MiniMoog, but it does fit in your pocket and your budget.

Interface zooming can be done either with the trackball (Nexus/HTC have them) or enable multitouch via the menu then tap the screen with two fingers at the same time - this will zoom the interface in/out. If you tap with two fingers but keep them held you can move the screen around. This kind of helps out with the dense graphics.

Patches are saved on the SD card along with factory sounds, there is an export and import option to exchange patches.

The emulator will, per default, attempt to run with a set of options that will give reasonable quality and the lowest possible latency/lag. The quality of the audio can be tuned with the menu options however the lowest possible latency for pretty much all Android devices is currently 42ms, on my HTC Desire it is 70ms. If you understand what this means then the value might seem quite high but the app is still a lot of fun.

Tested on HTC Desire/2.2, Emulator hires and lowres. The Mini is one of a family of emulators.

Twitter @bristolaudio

BME Synthesizer (v. 1.0.15)

Nick Copeland опубликовал приложение 2011-08-30
(обновлено 2011-08-30)

The is an emulation of an esoteric German synth known as the BME 700, very few in existence and using a unique dual filter design, one tracking the envelope and one resonating at a fixed frequency. The envelopes are also interesting, there are two A/R or A/S/R that can be mixed to create ADSR and other ingenious combinations.

The app supports pressure sensitive touch screens, X/Y accelerometer for pitch and mod wheel, multitouch and zooming interface facilities. The original was a monophonic instrument however the emulator can operate as a polyphonic (duophonic) synth via multitouch when it is enabled. The interface has options for fat-finger, analogue filters and rich oscillators however these will consume extra CPU cycles. The interface also has a full piano keyboard setting.

Interface zooming can be done either with the trackball (Nexus/HTC have them) or enable multitouch via the menu then tap the screen with two fingers at the same time - this will zoom the interface in/out. If you tap with two fingers but keep them held you can move the screen around. This kind of helps out with the dense graphics.

Patches are saved on the SD card along with factory sounds, there is an export and import option to exchange patches.

The emulator will, per default, attempt to run with a set of options that will give reasonable quality and the lowest possible latency/lag. The quality of the audio can be tuned with the menu options however the lowest possible latency for pretty much all Android devices is currently 42ms, on my HTC Desire it is 70ms. If you understand what this means then the value might seem quite high but the app is still a lot of fun.

Tested on HTC Desire/2.2, Emulator hires and lowres. The BME700 is one of a family of emulators.

Twitter @bristolaudio

Axxe Synthesizer (v. 1.0.15)

Nick Copeland опубликовал приложение 2011-08-29
(обновлено 2011-08-29)

The is an emulation of the ARP Axxe synthesiser, single oscillator, noise, mixer, filter and envelope generator fully emulated in software with modulation. The app supports pressure sensitive touch screens, X/Y accelerometer for pitch and mod wheel, multitouch and zooming interface facilities. The original was a monophonic instrument however the emulator can operate as a polyphonic (duophonic) synth via multitouch when it is enabled. The interface has options for fat-finger, analogue filters and rich oscillators however these will consume extra CPU cycles. The interface also has a full piano keyboard setting.

Interface zooming can be done either with the trackball (Nexus/HTC have them) or enable multitouch via the menu then tap the screen with two fingers at the same time - this will zoom the interface in/out. If you tap with two fingers but keep them held you can move the screen around. This kind of helps out with the dense graphics.

Patches are saved on the SD card along with factory sounds, there is an export and import option to exchange patches.

The emulator will, per default, attempt to run with a set of options that will give reasonable quality and the lowest possible latency/lag. The quality of the audio can be tuned with the menu options however the lowest possible latency for pretty much all Android devices is currently 42ms, on my HTC Desire it is 70ms. If you understand what this means then the value might seem quite high but the app is still a lot of fun.

Tested on HTC Desire/2.2, Emulator hires and lowres. The Axxe is one of a family of emulators.

Twitter @bristolaudio