Приложения разработчика FlexSystem в Android Market

Nctrace Point (v. 1.3)

FlexSystem опубликовал приложение 2012-11-27
(обновлено 2012-11-27)

This software is software which calculates the intersection of a straight line-straight line and straight line-circle and  circle-circle.
A CAD system performs an input.
A straight line and a circle are defined and it asks for an intersection.
The definition is  various  at a point, a straight line, a circle.
The pinch and a drug perform expansion of a figure, reduction, and movement.
The created element is named by the alphabet and the number of P, S, and C.
A number is rearranged when it deletes. (A number changes.)
Elements, such as a point, are choosing the point of a menu, a straight line, and a circle, and are expressed as a list.
Moreover, the display by carrying out the tap of the element is also performed.
The created element information can be saved on SD card.
Please profit without creation of NC program, or practice of CAD operation.
Moreover, please use "NCTRACE_MILL" and "NCTRACE_TURN" of NC data drawing.

Nctrace Turn (v. 2.3)

FlexSystem опубликовал приложение 2012-01-11
(обновлено 2012-01-11)

this software draws NC program (NC data) used with a machine tool -- it is soft.
NC program is a lathe system.
The coordinates of XZ are drawn.
In a single step function, NC program and its locus are drawn synchronously.
A single step function is performed by a tap.
The pinch performs expansion and reduction.
A drug performs movement.

Drawing speed can be changed by a seek bar.
The starting point of the drawn line, a terminal point, the circle central point, and a radius are displayed.

A menu has CLEAR", "Setting", and "CLOSE."
A screen is cleared by "CLEAR."
A drawing color etc. are set up by "Setting."
Application is cleared by "CLOSE."

The code and address which can be drawn are as follows.
Code: G00, G01, G02, G03, G17, G18, G19, G50
Address: IK, R, UW, XZ

Version2.2
Changed part:
1,The display of NC program was canceled.
2,"It opening" and "drawing" are excluded from a menu, and it was made to operate it with a button on a starting screen.
3,The "stop" and the "automatic scale" were added with the button.
4,A "seek bar" is added and it enabled it to change imaging speed.
5,NC program of a drawing line, the starting point, a terminal point, the circle central point, and a radius were displayed.

Nctrace MiLL (v. 2.5)

FlexSystem опубликовал приложение 2012-01-07
(обновлено 2012-01-07)

this software draws NC program (NC data) used with a machine tool soft.
NC program is a fraise system.
The coordinates of XYZ are drawn.
In a single step function, NC program and its locus are drawn synchronously.
A single step function is performed by a tap.
The pinch performs expansion and reduction.
A drug performs movement.
Drawing speed can be changed by a seek bar.

The starting point of the drawn line, a terminal point, the circle central point, and a radius are displayed.

A menu has CLEAR", "Setting", and "CLOSE."
A screen is cleared by "CLEAR."
A drawing color etc. are set up by "Setting."
Application is cleared by "CLOSE."

The code and address which can be drawn are as follows.
Code: G00, G01, G02, G03, G17, G18 and G19, G54-G59, G92 and G90, G91
*[G54-G59, and G92] are taken as the starting point of drawing.
Address: IJK, R, XYZ