Приложения разработчика COOPERSOFT в Android Market

CONDUIT SIZE CALCULATOR BS7671 (v. 1.0)

COOPERSOFT опубликовал приложение 2012-02-06
(обновлено 2012-02-06)

Conduit Size Calculator (UK)

Complies with BS 7671 : 2008

Calculate correct Conduit Size
in Seconds.

Simply Enter Number of Each
Type of Cable, Length of
Run, and Number of Bends.

Press Calculate, and Calculator
will Calculate Cable Factor and
Show required Conduit Size.

Suitable for :
Solid Cables up to 2.5mm
Stranded Cables up to 16mm
And Conduit Sizes up to 63mm.

Calculates Cable factor based
on Values given in On Site Guide.
BS 7671 : 2008

************************
Help :
If there are NO Bends
in Conduit Run, Enter '0' (Zero).
Enter Number of each Cable Type
into section for that cable.
Max 4 Bends Per Run.
Max Length 10 Meters.
**********************

Please rate this App if you like it.!!


KEYWORDS : Electrical, Conduit, Trunking,
BS 7671, 17th Edition, Wiring, Cables,
Volt, Voltage, Current, Amps, Power,
Electrician, Ohms, Watts

GAS RATE CALCULATOR (v. 1.5)

COOPERSOFT опубликовал приложение 2011-12-03
(обновлено 2011-12-03)

GAS RATE CALCULATOR.

An Excellent Little App that will
Calculate Gas Rates For NATURAL
Gas Supplies in Seconds!!!!

Simply Enter METRIC Meter Readings,
And Press Calculate...

Has built in timer and Alarm.
Alerts you when time to take
second Reading! (2 minutes.)

Results will be Shown in
Cubic Meters per Hour
Cubic Feet per Hour
BTU per Hour
and KW per Hour.

Second Meter reading is taken
120 Seconds after initial reading,
with appliance under test FULL ON.


Instructions are Supplied in Help File.

If you like this App please rate it.
If you would like extra features added
please email me.

**PRO VERSION NOW AVAILABLE !!!
Calculates Gas Rate From Metric
and Imperial Meters for Natural,
Propane & Butane Gas.

KEYWORDS : Gas, Gas Rate, Calculator,
Corgi, ACS, Natural gas, Butane,
Propane, Gas Supply, Meter Reading,
Plumbing, Boiler, Hot Water, Heating,
Heat Input,

LIGHTING CALCULATOR (v. 1.0)

COOPERSOFT опубликовал приложение 2011-11-30
(обновлено 2011-11-30)

LIGHTING CALCULATOR.

Calculate the required number
of Light fittings, for a specific
Room in seconds.

The Calculation is Done in 2 Steps.

Step 1 : Calculates the Room Index.
Simply Enter the Room Size, and Work
Height, And Room Index Will be Calculated.

Step 2 : Use the Room Index Calculated,
to Get the correct Utilisation factor (UF),
From manufactrurers data.
The required Illuminance for selected
room is selected for you.
Enter The Required Maintenance Factor (MF),
And Calculator will calculate the total
number of fittings required to give
correct Flux level for selected room Type.

Simple and effective app, designed
to make lighting calculations
quick and easy.

Illuminance (Flux) Ratings for rooms
are taken from guidance for CIBSE.

If you would like any features added,
or would like a specific app created
for Android Market, then please email
us at coops5575@gmail.com.

www.coopersoft.co.uk

RADIATOR (BTU) CALCULATOR (v. 1.3)

COOPERSOFT опубликовал приложение 2011-10-23
(обновлено 2011-10-23)

RadiCalc - British Thermal unit Calculator.

For calculating Correct Size radiator for Each
room in a Domestic Property.

(** BTU is the amount of energy required to heat
1 pound of water by 1 degree....)

Calculate Correct radiator Size
for each Room in Seconds!!!

No internet access required!!!

Excellent little App for your phone,
allowing heating engineers and
DIY Enthusiasts to calculate
radiator sizes for each room..

Suitable for domestic properties.

Select room Type,
Enter room size
Select Correction for :
Double Glazing
French Doors
North Facing etc.

Generates results in BTU and KW

Uses Formula used by majority of Plumbers / Engineers.

Please rate this App if you like it...
(C) Copyright W.Cooper 2011

www.coopersoft.co.uk

CABLE CALCULATOR BS7671:2008 (v. 1.5)

COOPERSOFT опубликовал приложение 2011-10-16
(обновлено 2011-10-16)

CableCheck - Cable Size Calculator

Calculate correct cable size
for a New Single Circuit
as done in Appendix 4 of
BS 7671 : 2008
(IET 17th Edition Regs)

No Need to refer to Regs!!!
No need to waste valuable time
looking up cable charts
or correction Factors.

CableCheck does it all for you!!!!

Works through a Cable calculation
in stages, as laid out in
Appendix 4 of BS 7671 : 2008.
This is the correct way to complete
an accurate calculation, making this
Application ideal for not
only Design Enginners and
Electricians, But also Students
currently taking ...
City & Guilds 2330, 2382 & 2391.

Works for Copper cables up to 95mm
For circuits protected by
MCB's/RCBO's,  (Up to 125A)
BS 3036 Fuses  (Up to 60A)
BS 88   Fuses  (Up to 200A)
BS 1361 Fuses  (Up to 100A)

Suitable for All Domestic, Commercial
and Lite Industrial Installations.

Calculates Volt Drop
3% Max for Lighting,
5% Max for all other.
Calculates R1+R2 and Zs
Calculates disconnection time for Protective Device.
Calculates Min Required CPC Size.

Helps you select correct cable Size
for tabulated Current.

Will warn you if volt drop Too
High, and let you select
Larger Conductor.

Applies Correction factors for you!!!
Based upon Chosen Installation Method,
Ambient Temperature etc.

Works for following Cable Types :
Flat Twin PVC
SingleCore PVC
MultiCore PVC
SWA PVC
SingleCore XPLE
MultiCore XLPE
SWA XLPE

Select from a wide range of installation
Methods as listed in Appendix 4 of Regs.
Including...
Clipped Direct
Conduit / Trunking
Methods 100 - 103
Cable Tray
Free Air
Direct in Ground
+ More...

Please rate this App if you like it!
Please contact me with sugestions
for updates / Additions etc.

coops5575@googlemail.com
www.coopersoft.co.uk

KEYWORDS : Electrical, Electrician, Volt,
Volt drop, Resistance, resistor, Cable calculation,
Wiring, Impedance, Ohms, Engineering, Power, Watts

VOLT DROP CALCULATOR BS7671 (v. 1.4)

COOPERSOFT опубликовал приложение 2011-09-28
(обновлено 2011-09-28)

ELcalcV-Pro Volt Drop Calculator

Select Correct Cable Size for
Volt Drop and Tabulated Current
In Seconds....!!!

Complies with Appendix 4 of
BS 7671 : 2008 17th Edition.

No Need to look up mV/A/M Ratings.
No need to Check Cable Current Capacities.
ELcalcV pro does it all for you.

Allows you to select cable type,
size and method of Installation.

Will not let you select undersize cable
for design Current of circuit.

Will not let you select incorrect installation
method for Cable Type.

Applies Correct mV/A/M rating
for selected Cable type,
Size and installation method.

This App is like having the Regs
on your phone, with regards to
calculating volt drop and selecting
correct cable size for current carrying capacity.

Works for copper cables up to 1000mm.
Suitable for 230V Single Phase and 400V 3 Phase.

Suitable for following cable types :
Flat Twin Cables   (70oC PVC)
Single core Cables (70oC PVC)
Multicore Cables   (70oC PVC)
SWA Cables         (70oC PVC)
Single Core Cables (90oC XLPE)
Multicore Cables   (90oC XLPE)
SWA Cables         (90oC XLPE)

Select from various methods of installation
as listed in BS 7671 : 2008 Including :
Clipped direct
Conduit
Trunking
Methods 100 - 103
Cable Tray
Free Air
Direct in ground

Please rate this App if you like it.

www.coopersoft.co.uk

KEYWORDS : Volt, Voltage, resistance, resistor,
impedance, cable, cable calculation, wiring,
conduit, trunking,
power, Ohms, Electrical, Electrician

ELcalc+ CABLE SIZE CALCULATOR (v. 1.2)

COOPERSOFT опубликовал приложение 2011-09-13
(обновлено 2011-09-13)

ELcalc+ Cable Calculation to BS 7671:2008

For Copper Cables up to 1000mm

No Need to remember any complicated formulas.
Application will do all required calculations
for you, when calculating correct cable size
for a new installation.

Complies with Appendix 4 of BS 7671 : 2008
(17th EDITION)

Calculates Volt Drop,
Earth fault Loop Impedance (Zs),
Minimum required CPC Size,
Design Current / Power,
R1 + R2 etc.

All required calculations for completing
a cable calculation.

Application runs through a cable calc,
step by step as laid out in
Appendix 4 of BS 7671.
There is a Help File in each section,
to assist you with selecting correct
correction factors etc.
Will guide you to the correct
Tables / charts etc in BS7671,
Making refering to regs quick and easy!

This makes this app ideal for students
currently taking City and Guilds 2382,
2391 & 2330.

Also an excellent tool for Domestic,
Commercial and industrial Electricians.

Works for all cable sizes,
Installation Methods etc.

This Application is a calculation Tool.
Reference to BS 7671 is still required.

*************************************
CableCheck also Available.
No Need to refer to BS 7671.
All correction factors applied
based on selected installation etc.
*************************************


Please rate this App if you like it.

KEYWORDS : Electrical, Volt Drop, Earth,
Wiring, Cable, BS7671, Engineering,
Installation, Electrician, Resistance,
ohms, Amps, Volts, Resistor, Copper

R1 + R2 (Zs) CABLE CALCULATOR (v. 1.2)

COOPERSOFT опубликовал приложение 2011-07-30
(обновлено 2011-07-30)

ELcalcZs Pro is an Electrical Calculator App,
That can be used to calculate the Resistance
of The Conductor Cable and The Earth Cable
(R1 + R2), and Earth Fault Loop Impedance (Zs)
for a new electrical installation.

This is Necessary for determining whether the
circuits protective device will operate within
the correct time limit,
Due to the fault current generated by the
resitance of the circuit.

Works for copper cables up to 1000mm.

Allows you to select ambient temperature,
and apply correction factors for cable type.

Complies with BS 7671 : 2008 17th Edition.

*******************************
ELcalc+ Cable Size Calculation
App Also Available
*******************************

Please rate this app if you like it.

PC Software available at
www.coopersoft.co.uk

Keywords: Electrical Cable wiring copper
resistance resistor impedance engineering
Volt Voltage Cable Calculation Design
Electrician

ELcalcZs Cable Resistance (v. 1.3)

COOPERSOFT опубликовал приложение 2011-07-20
(обновлено 2011-07-20)

ELcalcZs is an Electrical Calculator App,
that will calculate R1 + R2 and
Earth fault loop impedance (Zs),
for a new electrical installation.

Complies to BS 7671 : 2008 17th EDITION

Suitable for copper cables up to 25mm.

**********************
Pro Version available for cables up to 1000mm.
Also allows selection for ambient temp and
correction factors for cable type.
**********************

Please rate this app if you like it.

******************************
ELcalc+ Cable Size Calculation
App Now Available....
******************************

PC Software available at
www.coopersoft.co.uk


KEYWORDS : Electrical, Cable calculation, resistance,
impedance, Earth, Copper, wiring