Последние обновлённые инструменты в Android Market

13星座占い（新・獅子座） (v. 1.2)

licks опубликовал приложение 2011-07-02
(обновлено 2013-01-29)

13星座占い第5弾の新・獅子座編です
このあぷりの対象者は13星座の新・獅子座の方です
新・獅子座の方はこのアプリを使って占うことが出来ます
新・獅子座は4パターンの占い結果に別れます
4パターンのどれかになって占うことになります
まずは無料版で自分は１３星座の何か調べよう

ANdmp - Android NDMP Backup (v. 1.0)

Cronsult LLC опубликовал приложение 2013-01-29
(обновлено 2013-01-29)

ANdmp is the first and only Enterprise level backup application for Android devices. ANdmp seamlessly integrates with existing enterprise backup and archiving solutions, thanks to the Network Data Management Protocol (NDMP), mature, robust and proven interface.

ANdmp is targeted to IT Managers and enterprise users. For any number of Android devices deployed at corporate networks, the ANdmp standard interface to the existing backup and archiving solutions gives the IT Managers full control over the backup and archiving of any ANdmp enabled device under their responsibility, within their network.

  ANdmp fully leverages the existing backup and archive infrastructure. It does not require any additions to enterprise backup control applications

SimCard Security Demo (v. 1.7)

SnakePit Productions опубликовал приложение 2013-01-28
(обновлено 2013-01-28)

Please read the ENTIRE description before you download!

DO NOT install the application on dual SIM phones and DO NOT OPEN THE APPLICATION FROM MARKET!

First of all, the default password of the application is "begin" (without ").

THIS IS A DEMO. THIS APPLICATION WILL NOT SEND THE TEXT MESSAGES. INSTEAD IT WILL SHOW ON SCREEN THE MESSAGE TO BE SEND BY THE FULL VERSION APP.

Enjoy :) !

The application is used to receive the GPS location of your stolen/lost phone.

At phone boot, the application will verify if the SIM card is the registered one.

How does it work?

This application works on android 2.0 and later, supports both GSM and CDMA network.

The application contains two icons and two names (one for application manager and one for the android menu), this is done in order not to be found by anyone else except the buyer.

After installation you must run the application in order to make the required settings.

In the settings menu, on top you will see the actual SIM card number.
In the minutes tab input the MAXIMUM time between updating and sending the GPS location.
In the Phone No. input the phone number which will receive the text messages with the location of the phone.
Input twice the password. If the passwords do not match the save will not be made.
Block phone - means that in case the SIM card is changed and the phone is not locked, the application will NOT block the phone.
Reward - the amount that the finder of the phone will receive on returning the phone.

NOT TO BE CONSIDERED AS BUGS.

1. The application will send a text message on every try to disable the blockage. The timer that you set is the MAXIMUM time between text messages. We recommend a 15 minutes delay. The start is considered to be a new instance of the application - therefore it will send two text messages.
2. At enable GPS request - in order to force the thief/finder to enable the GPS, the application requests GPS activation until GPS is activated (if cancelation is tried, a new dialog will be generated - possibility of multiple dialogs until GPS is activated).

Tags: antitheft, sim, replacement, location, gps, cell, tower, lost, phone, find, thief, block, change, free.

HTML Viewer & studio classroom (v. 4.4)

tacor опубликовал приложение 2013-01-28
(обновлено 2013-01-28)

This is a tool of HTML source code viewer and file download from any URL. You can use this APP to search any string from HTML source code.

You can use this tool to watch or listen studio classroom by mobile phone (need Daroonplayer or Wondershare Player). You can download multimedia files from the URL and save it to SD card.

Apps Favorite (v. 1.0.6)

Masa опубликовал приложение 2011-07-02
(обновлено 2013-01-28)

Apps Favorite is simple shortcut app.
Apps Favorite is for register your favorite app.

You can start an app in a single tap.
and...
Reside in the status bar,You can comfortably start the application.
Also, There is a professional version that strengthens the function.

Your comments, Your request,Please contact the email address.

Tested environment
GalaxyS

Doorbell (v. 1.4)

Niloc опубликовал приложение 2013-01-28
(обновлено 2013-01-28)

How to use Doorbell:

Ring the bell, select a friend, and you're done!  It automatically sends them a message saying "I'm Here!"

Doorbell allows you to quickly let someone know that you have arrived.  Example: Say you are picking a friend up at their house.  Rather than call or try to write a text letting them know that you have arrived, just use Doorbell.  

A very simple time saving application free of charge.

Comments and Feedback are appreciated.

Game Timer (v. 1.15)

Ulrik Lindgren опубликовал приложение 2013-01-28
(обновлено 2013-01-28)

The idea behind the Game Timer application is to provide you with a timer that is easy to use when playing board games or social games.

Setup screen
The first screen that you get is the setup screen. Here you select the time(s) that the timer will use. After your selections are done press the start button at the bottom of the screen to start the timer user interface.
The settings is stored when exiting the application.

Run screen
Then just press on the screen to start the timer, to reset the timer just press once more on the screen.
When the timer reaches 0 the alarm sounds and you can start again. If you need to change the setup use the [back] button on your phone. This will stop the timer and bring back the setup screen. If you press [Home] button your timer will continue to run and the alarm will go off as expected.

Options
In the Setup Phase you have some options available if you press Menu on your phone.

Some of the options are:

Max & Min values – This give you a possibility to create a timer that will go off between these values. Useful in some games where you need a random time within some limits.

Phase 2 – After the time that is stipulated has passed an alarm sound and a second timer starts. Useful to get a warning signal before the times up.  

Have fun and play fair or at least have fun!

Link2SD (v. 2.2.3)

Bulent Akpinar опубликовал приложение 2011-07-02
(обновлено 2013-01-28)

Link2SD is an application that makes it easy for Android 1.6+ users with root privileges on their phone to move applications to the SD card.

The idea behind is same with apps2sd scripts, linking applications to SD card's second partition but differs in two ways.

One, instead of linking /data/app folder (that means moving all applications), you can select applications that you want to move.
Two, it's an application which means has a user interface. You can manage your applications with few clicks.

It also provides native apps2sd features on Android 2.2 and higher. It can move any non-protected user apps to SD card (force move), with batch moving capability.
That feature uses Android's standard SD-card installation feature and does not require a second partition. It can break some apps if they are not meant to be moved to the SD card (Such as Widgets).

Features:
- Create and remove link for apk, dex and lib files of the applications you select
- Automatically link newly installed apps (optional)
- Move any user apps to SD even though the app does not support moving to SD (a.k.a. "force move", for Android 2.2 and higher)
- Shows the apps that support moving to SD with native apps2sd (for Android 2.2 and higher)
- Set the default install location of the apps; auto, internal, or external (for Android 2.2 and higher)
- Batch link, unlink, reinstall, uninstall, "move to SD", "move to phone" functions (multi-select mode)
- Uninstall system applications (bloatware removal)
- Freeze and un-freeze system and users applications
- Convert system apps into user apps
- Convert user apps into system apps
- Integrate "Updated" system apps into system (ROM)
- Clear data and cache of the application
- Clear all apps cache at once (1-tap cache cleaner without being root)
- List applications, show detailed size information and link status
- Sort and filter applications
- Search applications by name
- Display available space information of internal storage, SD card and SD card 2nd partition

What you need:
- root permission.
- a second partition on your SD card.

You should have two partitions on SD card and both should be primary.
The first FAT partition is your standard SD card storage. The second partition is used for application files and can be ext2, ext3, ext4 or FAT32.
Some phones lack the ext2, ext3 or ext4 file system support and you may get mount errors like "no such device", "invalid argument". These phones need ext2.ko or ext3.ko modules and even some additional modules to be able to mount. Using FAT32 on the second partition will eleminate such problems, because FAT32 is supported on all phones.

Link2SD does not create the second partition, you need to create it yourself. You can use any partition manager such as Minitool, Paragon, Easeus etc. for this.

How it works:
Link2SD mounts the second partition of your SD card and makes OS mounts it at boot time.

When you press "Create Link" button Link2SD moves apk file, dalvik-cache (.dex) file and lib files (.so) to SD card's 2nd partition and creates symbolic links in original directories.

Note: On Android 1.6 and 2.1, shortcut and the widget of the app should be re-added to homescreen if you move the apk file.

You can remove the links and put application files back to phone. Just click on "Remove Link" button.

Some points
- System applications should not be linked to SD card. Link2SD does not allow these applications to be linked.
- When you connect your phone to PC as mass storage, Android unmounts the first FAT partition but the second partition remains mounted. Therefore linked applications are not affected and can be run without problems.
- Link2SD does not move application's private data files; it moves apk, dex (dalvik-cache) and lib files.

DISCLAIMER: It is made available for use at your own risk with no warranty of any kind.

Standard Clock (v. 1.891)

Atech Inc. опубликовал приложение 2011-07-02
(обновлено 2013-01-28)

"Standard Clock" is simple and cool analog clock App for Android. I designed it to fit in the living room, lounge and so on. You will never get tired of looking at it.

Standard Clock Free (v. 1.995)

Atech Inc. опубликовал приложение 2011-07-02
(обновлено 2013-01-28)

"Standard Clock Free" is simple and cool analog clock App for Android. I designed it to fit in the living room, lounge and so on. You will never get tired of looking at it.
add ad.