Последние обновлённые инструменты в Android Market

aDataConMon (v. 1.0.1)

amazing-create опубликовал приложение 2010-07-19
(обновлено 2013-06-11)

This app notifies the statusbar the connection of the Data communication.

Supported OS: 1.5-4.1+

App judges whether the data communication is possible now.

Blue-possible
Yellow-communication begins
Red-impossible

The setting of NotifyMessage can be changed.

Feet Inch Material Calculator (v. 1.00.104)

ByOne Coder опубликовал приложение 2011-08-31
(обновлено 2013-06-11)

- It's the most completed feet inch calculator plus common construction material calculation.
- Standard calculator look and feel to calculate Length, Area, and Volume by enter feet, inch and fraction.
- Input can be feet & inch (e.g. 2'6 1/2"), just inch (e.g. 5 3/4"), decimal feet (e.g 3.75 ft), or decimal inch (e.g 2.25") in the same calculation.
- Convert values between different units with the dimension.
- Convert feet and inches between decimal value and feet inch fraction format.
- Supported units: Feet, Inch, Yards, Meter, CM, MM, and Board Foot.
- It's easy to calculate lumber's linear board foot usage by enter the lumber's width, length, depth, and quantity, then convert to Board Foot unit.
- Function keys: Square, Square Root, Percent, sin, cos, tan, asin, acos, atan, Pythagorean Theorem and PI keys.
- Angle can be entered as Degree or Radian.
- With Percent key, it's easy to calculate the material waste.
- With Pythagorean Theorem key, just need two clicks to calculate hypotenuse of Right Triangle; no more need use with Square or Square Root keys.
- With the sin, cos, and tan keys, you can calculate distance with angle.
- Support M+ and M- memory keys to recall saved values.
- Calculate the Materials needed base on Length, Area, and Volume.
- User can customize the materials coverage to calculate the same category materials base on the needed.
- Supported material calculation: Concrete, Fence Post and boards, Gravel, Paint, Plywood, Roof Shingles, and Wall Studs.
- Built-in on-line user guide (Internet access required).
- Provide Haptic feedback (can turn off).
- Paperless tape feature.

User can request on-line user guide from the developer before purchase the app.

User may send additional material calculation request to the developer by providing the calculation logic, developer will review and may add into the app in next update.

1.00.102:
Add sin, cos, and tan keys under shifted mode.
Angle value can be entered as degree or radian.
Add configured setting to not shown FT or IN unit at the end when the value displays in Feet Inch format (per user requested).

BalusterPro (v. 1.1.0)

sgDroid опубликовал приложение 2010-11-19
(обновлено 2013-06-11)

***Named one of the top 100 new home products for 2011 in This Old House magazine***

NOTE: The default maximum run length is set to 96 inches and is easily increased in the preferences (Preferences>Slider Values).

BalusterPro is a unique tool designed for carpenters and woodworkers, but also useful for do-it-yourselfers and homeowners.

Makes calculating spacing of handrail balusters a quick and easy task. Can be used for any job requiring equal spacing between boards or slats.

-Flat and Stair Runs
-Tapered Balusters
-Inch or Metric

To use, enter the run length and baluster width and then slide the 'Balusters Needed' slider until 'Spacing Between Balusters' reaches a desired value (such as meeting code requirements). The number of balusters needed is displayed above the slider.

What users are saying:

Punch in staircase and handrail dimensions, choose the configuration, and this app saves you the tedium of calculating baluster spacing. Hallelujah.

-This Old House Magazine


BalusterPro is an awesome app and can be used for a multitude of layout tasks, at your desk, on the job, in your car—wherever your phone goes, and it only costs a few bucks.

-Gary Katz, Master finish carpenter and publisher of THISiscarpentry.com


BalusterPro makes building that stairway more heavenly

-homefixated.com


carpentry carpenter construction contractor guard stair rail balcony woodworking bannister

FMR Memory Cleaner (v. 1.19.3.2)

Fantasmo soft опубликовал приложение 2010-11-19
(обновлено 2013-06-10)

Simple memory cleaner.

This is different from task killer, frees up memory space using the feature that system kills running apps by low memory killer when available memory is low. This will improve the ease of use.

Clean Feature:
* Allocates very large memory during cleaning, and releases allocated memory.
* The system will kill most of running apps and services at a time. So the memory fragmentation can expect to improve.
* The services(widgets) is automatically started again by the system.
* The resident apps and Home app to back immediately after startup with less memory usage.

The timing of use:
* when you feel that system is slower.
* after use for a long time.
* after you have used the resident apps which is not killed the task killer.

How to use:
1. Press the clean button and begin cleaning immediately.
2. After cleaning, kill unused services by task killer if using or kill it from process list (Android 2.1 and below).

Requirements:
* Android 1.6 or higher

Operation check:
* Emulator(Android 1.6/2.x/3.x/4.0/4.1)
* HTC Magic, Xperia X10, REGZA Phone T-01C, Galaxy S2 LTE, Galaxy Nexus

Permission:
* NOT require Storage(WRITE_EXTERNAL_STORAGE) permission
  This app doesn't modify/delete SD card contents.

Speedtest.net (v. 2.0.9)

Ookla опубликовал приложение 2010-05-28
(обновлено 2013-06-10)

Use Speedtest.net for easy, one-tap connection testing in under 30 seconds—accurate anywhere thanks to our global network.

Millions of users have made Speedtest.net the #1 app for testing internet speeds, and it’s trusted by the professionals like Anandtech, Engadget, and even the BBC and New York Times!

- Discover your Download, Upload, and Ping
- Real-time graphs show connection consistency
- Troubleshoot or Verify the speeds you were promised
- Track past tests with detailed reporting
- Easily share results

Screen On (v. 2.4.1)

Konstantinos Polychronis опубликовал приложение 2010-05-28
(обновлено 2013-06-09)

This application will keep the screen on, when an application of those you have selected in the list is running. It periodically checks to find if the application is running and locks the screen not to sleep. When the application stops, the lock goes off.

*Screen on when charge option

Mobile Surveys (v. 8.0)

Stephanie Anthony опубликовал приложение 2011-08-30
(обновлено 2013-06-09)

For MMI users only.  If you are not an MMI user, do not install this app, it will not work!

Sweet Home WiFi Picture Backup (v. 4.176 alph)

SweeSoft опубликовал приложение 2011-08-30
(обновлено 2013-06-09)

Saves time and images

This app automatically copies pictures and video files from your phone/tablet to your network drive (NAS), server, media centre, or home computer. You can set the app to do it automatically when you arrive home or set your device to charge. No USB wiring required, one less thing to steal your time. Using the WiFi network in your home.

- Automatically upload pictures into your computer when charging, or immediately when home.
- Automatically organize uploaded files in folders by the file dates.
- Supports wake on LAN (WOL) option is available to automatically start your computer when you come home.
Works great also with Instagram and other photo apps.

Free ALPHA test version.

This program is also available as a low-cost donate version, with select stable versions and no end user obligations.

The free version is for trying and testing, and is fully functional, but it may ask you to upgrade when there are newer ALFA versions available. If you do not like to be a tester over time or just want to show support, please buy the low-cost pay-for version once you have found it working satisfactory in your home.

Please continue to support and contribute by updating to the latest versions, reporting issues (to support@sweesoft.com) and suggesting improvements.

In general, please share successes with the world, but more importantly - as goes for any Alpha-version tester, any found issues to support@sweesoft.com.

Includes easy-to-follow Guide for getting started.

Permissions required:

android.permission.INTERNET
This permission is required for the program to use the ip protocol in order to upload and synchronize images with your computer.

android.permission.WRITE_EXTERNAL_STORAGE
This permission is required for the program to access the  storage on your device where camera images and video is stored.

android.permission.ACCESS_WIFI_STATE
android.permission.ACCESS_NETWORK_STATE
These permissions are used by the program to check if you are on your home network (where the network share is likely to be available).

android.permission.WAKE_LOCK
This permission is used by the program to keep the WiFi connections alive during long upload sessions if there are large amounts of data (unfortunately, not all devices respect this).

Specifications
Protocol in use is CIFS/SAMBA
Maximum seen transfer rate is 1.2MB per second
Maximum number of files transferred in one batch is 2000
Maximum file size supported is over 1GB
Lazy evaluation of files that need transfer
User-selectable upload folder
User-selectable max upload frequency
User-selectable triggers (charging or WiFi connect & new picture taken)
Wake on LAN feature with Magic Packet technology.

Pretty lights come on in the house when properly connected.

Add2Hosts (v. 1.4)

Pau Oliva опубликовал приложение 2011-08-30
(обновлено 2013-06-08)

*** THIS APP NEEDS ROOT ACCESS, FOR ROOTED DEVICES ONLY ***

A simple /etc/hosts editor which will let you add entries to the hosts file from your phone: it only lets you add new entries, not edit, remove or modify.

Could be handy in some situations, for example:

- override public DNS response when you are accessing an internal server with public IP address behind a NAT
- re-add your custom hosts entries after you have updated the hosts file with other programs like AdFree

Needs root and unlocked NAND access to mount /system in rw mode, otherwise it won't work.

Passa (v. 1.5)

NG-Computing опубликовал приложение 2011-08-29
(обновлено 2013-06-08)

Password manager.

Features:
• AES-128 encryption
• Backup/restore (encrypted)
• Import/export (editable Text/XML/CSV)
• Password generator
• Inactivity lock
• Manageable, simple interface

Notes:
• Not suitable for storing large amounts of data as passwords.
• Uninstalling application or factory-resetting phone wipes all passwords. You can make backups to avoid data loss.

Disclaimer:
The application is provided in the hope that it will be useful, but without any warranty of any kind.