Последние обновлённые инструменты в Android Market

Mash (v. 1.2.47)

MobileBrewing опубликовал приложение 2011-09-20
(обновлено 2011-09-20)

Brewing with Mash makes an all-grain recipe easy to start. Looking for a fast and simple homebrew tool? This strike calculator adjusts on the fly and is a perfect homebrewing app for the beginner or advanced all-grain brewer.

♦ Featured in Beer West Magazine's 2011 Summer Issue ♦

FEATURES:
• Fahrenheit & Celsius
• Metric & US Measurement Scales

HOW TO USE:
Calculate strike water and infusion temperatures on the fly by sliding to the desired measurement and nudging the increments with the + and - at each end. Next adjust grain weight and water ratio to get your grist perfectly balanced. Set strike temps for Dough-In, Protein Rest or any other infusion temperature you desire. Not sure of the setting, tap and hold the label to pop up brew tips and definitions.

Different homebrew recipes may call for different infusion temperatures and methods. Stop approximating and get it right every time with Mash.

**Uses Free Adobe AIR Plugin to Run **
**Automatic Download when Mash Opens**

Anti Dog (v. 2.1)

Phone Apps Pro опубликовал приложение 2010-11-27
(обновлено 2011-09-20)

Anti Dog application : stop dog barking. Anti Dog is capable of emitting a sound that is audible only to dogs.

We cannot hear the sound since it is beyond the audio range of humans. Dogs can hear it and may avoid barking while the device is activated.

Note : results may vary. Completely free

Fake Playstation 3 Emulator (v. 1.0)

Nathan Roys опубликовал приложение 2011-09-20
(обновлено 2011-09-20)

Do you want to have playstation 3 on your android phone?






Fool your friend with this fake playstation 3 emulator, people will be amazed when they see you running ps3 games on your android phone!

Android API Browser (v. 1.0)

RubyAndroid.org опубликовал приложение 2011-09-20
(обновлено 2011-09-20)

The Android API Browser provides a convenient UI for exploring the Android APIs across versions. The Android Open Source Project publishes an XML specification of the API each time they release a new version. I've taken the specifications for each API available and built a single database for use with this application.

To use this application you will need to download the API database. The database is ~8MB and can be stored on either your internal or external storage. You will be prompted to download the database and notified when updates are available. The current database covers android-1 through android-14 (4.0).

This application was developed in Ruby through the Ruboto project (JRuby on Android). For more information on Ruboto visit ruboto.org.

Please email suggestions and feature requests to scott@rubyandroid.org.

Known issues:
- start up is slow
- poor performance on 1st gen devices

Wikipedia Droid Browser (v. 1.0)

Nathan Roys опубликовал приложение 2011-09-19
(обновлено 2011-09-19)

Browse Wikipedia in style with the new Wikipedia Droid Browser, with Wikipedia Droid you can browse wikipedia speedily and also keep bookmarks for viewing at later dates.

Keep all your bookmarks organized and browse wikipedia!

JDownloaderRcPro (v. 1.1.9)

.:: DevDroid ::. опубликовал приложение 2011-09-19
(обновлено 2011-09-19)

JDownloader Remote Client Pro.

Full control on JDlownloader from your android phone :
- Current downloads.
- Links with full text parsing.
- Stop/Start/Restart/Shutdown.
- Set speed limit / max downloads.
- Premium's accounts.
- Integration with navigator for sharing links.
- Compatibility with nightly build.
- Rss reader & link checker.

Pro Version is free Ads and got priority for updates.
Thanks for supporting us.

Before using :
- Activate JDownloader remote control plug-in.
- Be sure your ip is public and port open.
- Edit config after install !

Crider HM Donation (v. 1.0.3)

BrumPC опубликовал приложение 2011-09-19
(обновлено 2011-09-19)

Android application to manage your Hattrick team.

If you have any ideas or suggestions please say so on our forum at crider.nl and we will check them out!

Keep in mind that Hattrick does not allow Creating/Updating content with the API. This is something they are still working on. So for now only Reading is possible.

Whistle on Android (v. 1.5)

yasulab опубликовал приложение 2011-09-19
(обновлено 2011-09-19)

According to the rule of thumb in Japan, whistles help you survive after natural disasters such as Tsunamis and earthquakes. In particular, they will be beneficial in case that you cannot escape from collapsed buildings. However, it is not in practice to always hold a whistle for disasters that you cannot expect to occur. So, put it into your belongings, your smart phones. This will help you when accidents happen.

TimeProfiles (v. 1.1)

DroidAceApps опубликовал приложение 2011-09-19
(обновлено 2011-09-19)

It's a daily issue for the job goers to set the mobile ringing profiles to vibrate when in office and reset it to normal mode when out of the office. Some of us are so lucky that we get call just when we forget to set the phone in vibrate mode while we are in office. :-)
  
  So how cool the life will be if an App takes care of these all based on a given Time range. Just we set Start and End times to auto change mobile's ringing profiles for each of the regular places we go (like home, office, party etc.,). In total below are the features provided by this app they are,

   1. Users can give Time ranges to set different ringing profiles like Vibrate mode, ring tone volume, audio volume alarm volume for each of the profiles.

   2. As far as a daily 9-5 workers or 2-3 part time job workers/day are concerned, they need limited profiles to set on a day.So instead of multiple confusion profiles we gave limited but useful number of profiles to set. They are as,

  1. Home -> Profile to run when the user is in Home

  2. Office -> Profile to run when the user is in Office (useful to 9-5 office goers)

  3. Job 1 -> Profile to run when the user is in Job 1 place (Useful for multiple part time job doers/Day)

  4. Job 2 -> Profile to run when the user is in Job 2 place
(Useful for multiple part time job doers/Day)
  
  5. Pub 'n' Evenings -> Profile to set when the user is in pub on evenings.

  6. Default Settings -> settings when no profile is running

Most interesting are,

   7. Do not Disturb Me(ON/OFF) -> Just press this when you are in a movie or in some other place where you don't want to get disturbed. This profile makes all sounds to mute (including mail notifications, audio etc.,).
         When you don't need it just OFF it with one more click and it returns you to the previously running profile
  
   8. It's Party Time(ON/OFF) -> Just ON this with one click when you are in any busy party so that every sound of your mobile is on high volume.
       When you don't need it just OFF it with one more click and it returns you to the previously running profile.

To make you clear about these below is an Example,

   Step 1: Click Home icon to set a profile for Home

   Step 2: It opens another screen where you can set Starting and Ending times of this profile to run on given days.
              Ex: Set all sounds range
                  10:00 AM - 12:00 PM
                  Check Vibrate Mode
                  Profile Days: sun, mon, tues

   Step 3: Click Done. Your are done.

From now on the above profile runs in the given time range.

Hope all of you enjoy our product.

   Note: Please send all of your comments/feedback/Suggestions to our mail id podsatya@gmail.com

Tampermonkey (v. 1.1)

Jan Biniok опубликовал приложение 2011-09-19
(обновлено 2011-09-19)

Tampermonkey is a Greasemonkey compatible script manager for Android. Please note that Tampermonkey is still in beta state.

Tampermonkey provides enhanced userscript support for Google Chrome, Chromium Browser and now Android. It's API is fully compatible to Greasemonkey.

This means support of:
- all GM_* functions including:
  * GM_registerMenuCommand
  * GM_xmlhttpRequest with cross domain support
  * GM_getResourceText
  * GM_getResourceURL
- the tags:
  * @resource and
  * @require
- read access to variables of the unsafeWindow object
- access to functions of the unsafeWindow object (but there is no return value).
Furthermore there is a GUI to manage your installed scripts.