Новые инструменты в Android Market

Lost Phone (v. 1.4)

King Kong Lock опубликовал приложение 2013-01-11
(обновлено 2013-01-11)

After losing Mobile phone, as long as somebody replace the mobile phone card, the application will automatically send message to your mobile phone anti-theft set ( a good friend's number) when start the mobile, you can get the number of opponent by the source of message.
Set up friends number and fill in their information content, can be achieved by sending the test alarm short message content.
Additional features:
GPS location tracking, mobile phone in the other phone is also equipped with anti-theft cases, the other to set your phone number while on the anti-theft security number, your phone can be tracked through each other's cell phone, just go to the track page enter each other's phone number, you can click on GPS tracking.
    USB interception is the function that launch password protect interface when USB cable connect to PC and close the service of APD debug.Note：This function need root support.

My Lover (v. 1.1.5)

ChangHyun Kim опубликовал приложение 2013-01-11
(обновлено 2015-04-10)

매일매일 하루에도 몇번씩 사랑하는 사람에게 전화를 하는 분들을 위해 만들었습니다.

최대한 가볍고, 편하게 만들기 위해 처음의 설정 이후 상태바 또는 앱의 아이콘을 클릭만 하면 바로 설정한 전화번호로 바로 전화를 겁니다.

전화번호 / 설정을 바꿀려면 앱을 삭제 후 다시 설치하여야 합니다.

한번씩 써보시고 의견 부탁드립니다.

자세한 내용/수정내역/질문은 http://www.cyworld.com/bacharis > 게시판 에서 확인해주세요.

* 여러분의 의견이 저에게는 큰 힘이 됩니다. 물론 의견수렴도 가능하면 하고 있고요 ^^ 감사합니다.
----
개발자 연락처 :
00-000-0000

Electrician Electric Calc (v. 2.2)

RFX Labs опубликовал приложение 2013-01-11
(обновлено 2013-01-11)

Electrician Calculator Pro - National Electric Code (NEC) compliant calculator for electricians, engineers and electrical professionals, electrical contractors, designers, lighting experts, inspectors, maintenance personnel and builders!

Now this app can be used in English, Spanish, Italian, French, or German!

Visit our website for more details: http://www.ElectricianCalculator.com/


Is currently compliant with NEC 2011, NEC 2008 and NEC 2002, and future updates are FREE!

Forget about complicated key combinations normally required for NEC calculators! With this app you'll be able to perform the following calculations in a straightforward way:


---- Voltage Drop ----
All voltage drop calculations use NEC chapter 9 table 8 values (either stranded or unstranded), and ambient temperature is taken into consideration as per NEC chapter 9 table 8 FPN 2.

• Find voltage drop (in volts and percentage).
• Find the maximum cable length given a required voltage drop and wire gauge (for single and three phase circuits).
• Find the minimum wire gauge given a required voltage drop and distance (for single and three phase circuits).




---- Ampacity ----
Ampacity calculations use NEC tables 310.16 and 310.17 to find maximum ampacity or minimum wire gauge. The correction factor for temperature is used in these calculations.

• Find the minimum wire gauge given an amps value and ambient temperature (can specify if it will be in a raceway or free air).
• Find the maximum ampacity of a cable given its gauge, the ambient temperature, and if it is in a raceway or free air.





---- Conduit sizing and conduit fill ----
Conduit and cable diameters are obtained from the tables in NEC chapter 9. Maximum fill percentages are obtained from NEC chapter 9 table 1.

• Find the minimum size conduit given the gauge and number of cables.
  - Can specify the following conduit types: EMT, ENT, FMC, IMC, LFNB, LFNA, RMC, PVC-80, PVC-40 / HDPE, PVC-A, PVC-EB.
  - Can specify the following insulation types: THHN, THWN, THWN-2, THW, THHW, THW-2, TW, XHH, XHHW, XHHW-2, RHH, RHW, RHW-2.
• Find the maximum amount of cables that can be used, given conduit size and type, and cable gauge and insulation.




---- Motor full load current ----
Motor full load current values are obtained from NEC tables 430-247, 430-248, 430-250 in chapter 9.

• Find the motor full current load for DC motors, single phase, squirrel cage, wound rotor, and synchronous electrical motors from 1/4HP to 200 HP.




---- Grounding conductor ----
Find the grounding conductor for service entrances and equipment, as per NEC tables 250-66 and 250-122.




---- Capacitor KVARs ----
Find the capacitor KVARs that must be connected to the system in order to correct low power factors caused by inductive loads.




---- Power cost ----
Estimate the financial cost of running a specific load. You enter your KWH rate, the load in KW, and the hours spent with the load connected, and the calculator will return the cost. You can select your own currency from the Preferences section.




---- Preferences ----
The app preferences will allow you to choose to enter Values can be entered in Feet or Meters, Celsius or Fahrenheit. You can also select to use copper or aluminum cables by default, and select to use stranded or unstranded cables.

You can also choose to use this app in Spanish.




---- Support ----

If you are not 100% satisfied with this calculator please email us at info@rfxlabs.com so we can answer your question or comment before posting any negative reviews. We are constantly providing updates and adding new functionality. Planned updates include bend radius calculations, grounding, circuit breaker selection and more.


Note: This product is not associated with Calculated Industries, ElectriCalc, ElectriCalc Pro, nor with Electrical Calc Elite. NEC is a registered trademark of the National Fire Protection Association (NFPA).

AgDroid (v. 1.0.9)

Farmscan AG Pty Ltd опубликовал приложение 2013-01-11
(обновлено 2013-01-11)

Manage your farm like never before with the ultimate portable productivity tool for agriculture, farming, forestry and more!

Record multiple fields and jobs, including applied products (fertilizer, herbicide, fungicide etc).
Record and calculate field and job/coverage area based upon field boundary, distance travelled and implement width, with recording start and stop.
GPS area calculation works for both field boundary area, and job coverage area.
Import and export field boundaries, and export job coverage trails, in KML format.
Record field features as marked points with descriptions.
Moving map display allows North-Up or Heads-Up operation.
Works with metric and imperial units.

FreeHandDraw+PhotoEditor (v. 2.8)

9 Soft Tech Co. опубликовал приложение 2013-01-11
(обновлено 2015-04-10)

Drawing anything.
Photo-Editor: cut/paste/rotate/mirror....

Photo-Note, Paint-Pad, Draw-Pad, Note-Pad...

You can open your photo,and use your finger, direct write note/paint on your photo

Or you can draw on plain canvas, you can select the color of the canvas/background,white,gray,black,yellow..., draw line,circle,square...free hand.... make every phone like Galaxy-Note.

After drawing, you can use Photo-Editor to paste another icon/photo/picture on top of your drawing.

It comes with an email-sender module:

You can write your message, create your drawing, and then send the resulting Picture out by Email.

You can open your photo, and repaint, write note on it.

with the file name: 20YYMMDDhhmmss.png
e.g. 20130530085959.jpg


Drawing basic shapes : Line, Rectangle, Square, Circle, Ellipse, Oval, filled or not.

Drawing Shapes by 2 clicks (2 touches on screen).
2 Clicks to define the region where the shapes to be enclosed in.
2 Clicks are the region's LTC, RBC.
LTC: Left Top Corner point,
RBC: Right Bottom Corner point.

Except for Circle and Square, 2 Clicks are Center, Edge.


support tablet, USB
Drawing auto-saved to internal Memory/Storage.
You can use Photo-editor to copy them to else where, SD....

Date Calculator (v. 1.4)

Georg Kiefer опубликовал приложение 2013-01-11
(обновлено 2013-01-11)

This 'Date Calculator' lets you add days to a date or subtract days from a date.

マイポケット アドレス帳 (v. 1.0.3)

NTT Communications Corporation опубликовал приложение 2013-01-10
(обновлено 2013-01-10)

NTTコミュニケーションズが運営する「マイポケット」にあなたの大切な連絡先情報を自動でバックアップしてくれるアプリです！
マイポケットアドレス帳を使えば、連絡先を追加、変更、削除しても、マイポケット上に即座に反映され、常に最新の状態で保持されます。
また、端末故障、紛失や機種変更時には、マイポケット上にバックアップされている連絡先情報を新端末に簡単に移行できます！

主な機能：
・連絡先情報を自動、もしくは定期間隔でバックアップできます
※端末で削除した連絡先情報はマイポケット上からも削除されます
・バックアップされた連絡先情報を新端末に移行できます

ご利用には、「マイポケット」のお申込みが必要です（月額315円）。

Uninstall Pro (v. 1.0)

Evo Mobile опубликовал приложение 2013-01-10
(обновлено 2013-01-10)

This application will help you navigate between your application and it 's possible Ethier to launch them or uninstall them by just long click on them .
as you can see in the picture. There is tow type of application :préinstalled application which you can't uninstall them becouse it already exists in the karnel android but all the other it possible to unistall.

Scientific Graphing Calculator (v. GC-2.12)

KJMJ LLC опубликовал приложение 2013-01-10
(обновлено 2013-01-10)

Math in One graphing calculator can evaluate any mathematical expression of any length and complexity that includes real or complex numbers. It can operate in decimal or common fractions format. It graphs in Cartesian, polar coordinates or parametric equations.  Expressions can be entered in editor text box Input Output Display (IOD) and then edited in the middle of the string (text) on any line. The calculation execution can be performed from any line in (IOD). If a user makes an unsupported entry during the operation of this software, the calculator will generate an error message and explanation. The help is built in to the calculator and available on line.  It also includes a uniquely designed Unit Converter and financial analysis (savings, loans, bonds).  
In Cartesian coordinates, plotted multiple graphs can be moved and resized. Function values may be displayed for a specific independent variable. Tracing the pointers on a screen, one can find zeros, minimums, maximums and intersections of functions. Function’s first and second  order derivative can be added to the graph display. Draw tangent or perpendicular line to the existing function at select point or line crossing two points on one or two functions. Calculate intersection of two functions and area bounded by one, two or three functions.
The Unit Converter has 19 different categories of units of measurement. There are 20 SI prefixes that can be applied to any unit. It supports 170 unique units, 1990 derived units, and when the prefixes are included there is a combination of 43,200 different units that can be converted. Any number in calculator’s IOD can be moved to UC, converted and then replaced. In addition, the number to be converted can be edited anytime directly in UC.
It recognizes 16 operators, over 60+ basic functions that are calculated in complex numbers, and 85 mathematical and  physical constants(e.g. “trigonometric, hyperbolic, logarithmic functions and there invers”, “probability functions” "beta function", "gamma function", "error functions", and more special functions,  " logical operators like exclusive or (XOR)", "Planck's constant", "atomic mass constant", "Avogadro's number",...). Finds zeros of any function in real or complex domain. Evaluates derivatives up to nine order and calculates integrals. Function’s first and second order derivative and Integral can be used in expression.  
Evaluates calculation error for any function or expression. Displays calculation results in selected Sig Fig notation.  Converts between binary, octal, decimal, and hexadecimal number systems. Performs arithmetic and logical operations on any number systems ("and", "or", "exclusive or", "not", "shift"). Executes trigonometric function calculations in radians, degrees, or gradients. The value of the last calculation computed is automatically stored in an "arg" variable, which is then ready for use in the next operation. Results from any calculation can be stored in the memory entry for future use with no limitation on the number of memories. Contains additional memory known as “Expressions” to store mathematical formulas that can be used in applications and graphing functions.  
Option menu/Settings:
- Screen On – Keep screen on when calculator is in use
- Text Display – Font Size
- Pull Down Menu – Font Size
- Display Calculation error
- Fraction display format
- Decimal separator selection (dot vs. comma)
- Haptic Feedback –vibration

You can review our response to User Reviews at http://mathinone.com/calculator/help/comments.php
For more details visit us at http://mathinone.com.

ScanShot (v. 1.08)

Pitney Bowes опубликовал приложение 2013-01-10
(обновлено 2013-01-10)

Use ScanShot, from Pitney Bowes, to read QR Codes and most other barcodes in one app. There’s no more jumping between different apps every time you see a different kind of code. ScanShot quickly links you to all types of digital content.  It will launch your mobile browser, access videos, import a contact from a vCard, display mobile coupons and access just about anything else you can think of.

This app allows you to keep a history of your scans and share them via Facebook, email, SMS or other applications.

You can also go to www.pbsmartcodes.com to create your own QR codes and QR marketing campaigns for free!  Start connecting physical marketing to mobile devices and deliver powerful, integrated communications to promote your business.  

Features:
1. Scans multiple barcodes including QR Codes, data matrix and 1 D
2. Create QR codes
3. Share scanned QR codes
4. Hyperlink to information
5. We can access links - access links in what capacity
6. Add new contacts
7. Automatically dial phone numbers from Scanned QR

Note:  
ScanShot reads QR codes and most other barcodes, including a 1D barcode and data matrix.

Key words:QR Code, pbSmart, Barcode Scanner