Последние обновлённые в категории 'Связь' в Android Market

Where are you (v. 1.4)

MobiDeveloper опубликовал приложение 2011-10-23
(обновлено 2011-10-23)

WRU: Where are you? Personal GPS tracker

*** This app should be on the phone you want to track ***

WRU-Service helps people to check on the location of their friends and family when needed without disturbing the person being tracked.  Just install this app on the phone you want to track and from another phone send an SMS 'wru' or 'wru-t' to the phone which has the app.  

Once the app receives 'wru' (or 'wru-t') SMS it sends an SMS with geo co-ordinates back to the sender.  If the sender also has this app then it shows the location by opening the map application.  If you want to see the location on google maps on the internet then open http://maps.google.com and enter in the co-ordinates alone with the comma in the middle to see the point. example:  42.581926, -83.673535

Service can also be started by the user who wants to be tracked through the GUI service. Just enter the telephone number which should receive your co-ordinates and press 'WRU' OR 'WRU-T'.

Types:
1. WRU: Recent location is sent once or at most twice if a stale location is detected. No need to stop as the application stops by itself.  

2. WRU-T: Application keeps sending co-ordinates every 1 mile the user moves. If the user is not moving then further updates are not sent. You need to send 'stop' SMS or press 'STOP' from GUI to stop 'WRU-T'

Phone requirements for this app to function correctly:
1. You should be able to send/receive SMS.  
2. You should have GPS locator/Network locator service on your phone.

If either one is missing then this app will not work. An easy test to see if this app works on your phone is to start the GUI service and enter in your telephone number to send an SMS to yourself. Watch the different messages and finally if you receive an SMS with the geo co-ordinates and also if the google map opens up showing your location on the map, then  the app works for you, else one of the messages will tell you where it failed.

If both are available and occassionally is un-reliable (e.g.,SMS takes a long time etc) or does not work then it could be:
1. Your phone is out of SMS signal range. An easy check is to see if you are able to send/receive SMS. If you are NOT able to send/receive SMS promptly then NEITHER can the app.
2. GPS/network locator service is switched off or for some reason not working.

This app is not the reason for not working in any of these cases.

Salient features of this app:
1. Very low memory foot print.
2. Saves battery as the location service is turned on only when needed.
3. No third party website is collecting your location data. It is only sent to the person who sent you 'wru' or 'wru-t' SMS or you decided to send to someone yourself.

Some other possible usage scenarios:
1. You lost your phone and want to trace it. All you need  is another phone from which you send 'wru' SMS to your phone and wait to receive the co-ordinates from your lost phone.
2. If you think someone stole your phone and is moving with it then literally track the thief down by sending 'wru-t' to your phone.
3. Your vehicle has a breakdown/accident on the road and you want to send your location co-ordinates to get help.
4. You want to know when your loved one leaves office and gets close to home as you are throwing a surprise party. Send 'wru-t'. Once your loved one leaves office you get updates every mile.
5. You want to track your teenager but do not want to call as the kid could be driving and you do not want to disturb when all you are trying to find is where they are.
And many many more.....

A note on Location providers:
1. GPS is the best and most accurate but some people do not like using it as it consumes more power.
2. Network provider does not give accurate location and also even though the phone hardly moved, the location seems to shift to other near by tower sometimes.  Please be aware of this.

Last but not the least, Thanks to all the good folks who have given great ratings, reviews and useful feedback! It is much appreciated!

LED PartyBoard 3 Unlock KEY (v. 1.1)

DKIT Android Ltd опубликовал приложение 2010-12-11
(обновлено 2011-10-23)

This is an UNLOCK KEY for the DKIT Android app LED PartyBoard 3.

Download the FREE version of LED PartyBoard 3, then buy and download this unlock key to unlock more content and remove ads from the app.

THIS KEY IS NOT AN APP ON ITS OWN, IT REQUIRES LED PartyBoard 3 VERSION 3.1 OR LATER.

MyYammer (v. 1.0.4)

Brandon Broschinsky опубликовал приложение 2010-12-11
(обновлено 2011-10-22)

MyYammer is simple yammer client hoping to grow into a fully customizable client.  Please provide feedback and suggest which features should be added next!

To get the pin, follow the instructions on the help button.

Children of God! Read Bible. (v. 1.1)

Seung Ho Lee опубликовал приложение 2011-10-22
(обновлено 2011-10-22)

* Feature
1. Show whole status
2. Select book unit
3. Select chapter unit
- Select/Cancel All
- Select Range/Each

EzineArticles (v. 1.3)

EzineArticles опубликовал приложение 2010-07-29
(обновлено 2011-10-22)

This application allows you to search and read articles from EzineArticles on your Android device.

ProCon (v. 1.0)

GeoComputing Apps опубликовал приложение 2011-10-21
(обновлено 2011-10-21)

ProCon is an Android remote control application that lets you control programs written using the Processing computer programming language. If you don't use Processing then this app will be of no use to you. It requires an Android device with OS v1.6+ and built-in wifi.

To control Processing, ProCon has a large panel to use as a mouse-like touch panel, a slider and four buttons. The position of your finger on the touch panel is sent to Processing, together with messages telling your program when the slider position changes or a button is pressed. If you have a g-sensor (accelerometer) in your Android device then it's values will be streamed to Processing, together with the orientation of any compass you also have in your device. That all allows you to do some quite sophisticated remote controlling of your Processing programs. You can also send a toast message to ProCon from Processing (try pressing the 'h' key on your PC while trying out the demo code).

To use ProCon simply do the following:

1. Connect your Android and PC to the same wifi network. Also, make sure you have the demo Processing code (see below).

2. Run ProCon on your Android and change the IP address in your Processing code to be the same as will be shown on the ProCon title bar (if it says 127.0.0.1 then try running ProCon again).

3. Run the Processing code and soon the title bar in ProCon should tell you that you're connected, in which case try some remote controlling.

4. If you get an error in Processing (e.g. 'No route to host') it's most likely that you have a network problem. Mostly this shouldn't happen, but if it does then closing the programs, disconnecting from the wifi, and trying again usually works.

Depending on how popular ProCon is future revisions could include additional button layouts, user defined layouts/graphics, and keyboard code sending.

If you like ProCon, why not take a look at the app store page at www.geocomputing.co.uk. Processing code to use with ProCon can be found at http://www.geocomputing.co.uk/getpage.php?type=page&page=androidprocon which you can adapt to your own needs.

This app is Copyright 2011 Andrew Thomas. No warranty is provided even of merchantability.

txtForward - SMS to Email (v. 1.0.5)

Electric Pocket опубликовал приложение 2010-06-01
(обновлено 2011-10-21)

txtForward automatically sends a copy of your SMS text messages to any email address you specify, for backup or as a handy way to get your messages at your desk.

Send your SMS messages automatically to any email address, and easily back them up or read them from your desktop email client.

Loky PLUS Trial (v. 2.1.0)

Loky опубликовал приложение 2011-10-21
(обновлено 2011-10-21)

***THIS IS AN EXCLUSIVE FREE 14 DAY TRIAL***

***DIAL ##123 AND THEN PRESS 'CALL' TO OPEN THE APP WHEN YOU FIRST DOWNLOAD***

***ONCE PIN IS SET, THIS BECOMES YOUR ACCESS CODE. ENTER ## FOLLOWED BY YOUR NEWLY-SET PIN!***

***ENHANCED FEATURES OF STEALTH MODE (NO APP ICON!!) AND ABILITY TO HAVE TWO SEPARATE ACCOUNTS!***

We’re all entitled to a little privacy, especially where our mobiles are concerned. Download Loky PLUS to create a secure, private area on your mobile where you can secure sensitive contacts, filter their messages (SMS & MMS) away from your regular message inbox, hide your messages back to them and even store your sensitive media files and documents!

Features of Loky PLUS include:

***STEALTH MODE***
Loky PLUS operates under Stealth Mode, meaning there is no visible app icon! To open Loky PLUS, simply enter ##123 and the app will open for you! Once you have set a PIN, to open the app, simply enter ## followed by your PIN!

***SECURE YOUR CONTACTS***
Secure sensitive contact information in a fully-featured and most importantly, secure address book. Loky PLUS gives you more than just a simple contact list.

***SECURE YOUR SMS & MMS***
Automatically redirect SMS & MMS messages to and from your Loky PLUS contacts so that they avoid your phone's regular messaging app altogether.

***SECURE YOUR FILES***
Store, manage and view media files and documents from the safety of a secure file locker. Loky PLUS can secure all sorts of files!

***PROTECT YOUR PRIVACY***
Everything in Loky PLUS is securely protected by a PIN that you choose yourself when you first download the Loky PLUS app.

***MULTIPLE ACCOUNTS***
Set up a second account to keep your business and personal lives separate!

***STAY ALERT***
Loky PLUS can send you a 'dummy' SMS, vibrate or play one of three sounds when you get Loky PLUS mail, so that you always know when to check for new messages.

***SHAKE TO CLOSE***
Need to close Loky PLUS in a hurry? Shake your phone firmly but lightly and Loky PLUS will close down automatically, leaving you in the clear!

***SECURITY LOG***
Loky PLUS saves a record of all successful login attempts, so you can be sure no-one has accessed your account!

***CAPTURE IMAGES***
You can capture images right from within Loky PLUS, so that the moment you take a picture you know that it's already under lock and key!

***PRESS & HOLD***
Press and hold the screen for a short time on a contact, message or file and discover a whole new way to interact with Loky PLUS.

***TELL YOUR FRIENDS***
Loky PLUS makes it very easy to recommend the app to friends who value privacy too. Simply press and hold on a contact to get started!

***LANDSCAPE MODE***
Loky PLUS supports landscape mode, so if you have a handset with a slide-out keyboard you'll find Loky PLUS simple to use!

***SUPPORTED LANGUAGES***
Loky PLUS is available in English, French, Spanish, German, Italian, Russian and Portuguese!

Don’t forget to follow us on Twitter and become a fan on Facebook so you can be the first to hear about further exciting developments of Loky PLUS!

If you have any new suggestions for features, please feel free to send them to info@loky.me - thanks!

Upgrade to full version: https://market.android.com/details?id=com.kc.lokyplus&feature=search_result

VIP Connect (v. Version 1.)

VIP Communications опубликовал приложение 2011-10-20
(обновлено 2011-10-20)

What is VIP Connect?
VIPConnect is an app that allows VIP customers to call international numbers using your VIP account seamlessly from your mobile. Dial from your contacts, recents or dial pad, and the call will be routed through your VIP account at great rates.

Not a VIP customer?
Download VIPConnect and click the signup link to open an account on your mobile, or call 1-877-JOINVIP from North America to get the best rates and quality for international calling from your mobile.

How does VIPConnect work?
When you make a call on your phone, if the call is terminating outside of the US a prompt will appear with an option ‘Call using VIPConnect’.  Select it and the call routes over VIP at the same low rates and great quality you are used to with your VIP account.

Problems installing/using?
We provide installation support at vipconnect@joinvip.com or 1-800-836-5004.

Media reviews:
“If you’ve ever used Google Voice on your Android device, VIPConnect works in the same way. Once a phone call is initiated by the user, a prompt will appear with an option to ‘Call using VIPConnect’ which uses the same low rates your already accustomed to with VIP Communications.” – Android Guys

ec2ctl (v. 1.0)

matsumo опубликовал приложение 2011-10-20
(обновлено 2011-10-20)

Check your instances.
Control your instances.
for Amazon EC2.

Set your Access Key ID & Secret Access Key in setting.


Access Key ID & Secret Access Key is below.

Login AWS Management Console.
http://aws.amazon.com/jp/console/

Show Your Account->Security Credentials.