|
Roofing Ready Reckoner (v. 2.0)
Разработано GSaunders
|
Metric Version
Enter the Building Span, Roof pitch and Rafter spacing
and this Reckoner, will return the TRUE LENGTHS of Hip, Valley and Common Rafters to Three decimal points.
It also give you the Jack Rafter diminish and all the Plumb Cuts, Seat Cuts and Jack Rafter Edge Cut angles in degrees for the Roof members.
Newly added Purlin Edge Cut and Purlin Side Cut Angle,
Hip Backing Angle, Hip Edge Angle,Plan Angle and Sheathing Angle.
There is some diagrams on using True lengths on my web site
http://roofersreadyreckoner.co.uk just follow the link lower on the page
Save time,money and less wasted timber when pricing by working out Roof timber lengths using this easy to use Roofing Ready Reckoner as Reviewed in Home Building and Renovating magazine.The review can be read on my website as listed below.
Timber thicknesses for Hip/Valley and Ridge need to be subtracted from the returned true Rafter Lengths and the roof plates must be level, paralleled to each other and square.
Remember this app returns the True Lengths of the rafters..
Disclaimer:
This is a aide to Roofing and a basic understanding of roof framing is necessary, always double check measurements..(measure twice...Cut once).
I have checked the return values rigorously but i cannot check every possible combination of returned values.
As roof projects/building construction are out of my control, i cannot not accept any responsibility regarding materials,workmanships or costs relating to the use of this Roofing Ready Reckoner..always check your measurements.
(measure twice...Cut once).
