Nuts & Bolts (v. 1.1) Разработано Tim Judkins |
Nuts & Bolts is a simple application to look up screw sizes. It provides screw diameters, screw head dimensions, tap drill sizes, and clearance holes for standard sizes #0 to 1" and metric sizes M1.4 to M24. A simple interface allows you to cycle through sizes and screw types OR tap any dimension to quickly jump to the size you want.
Free version includes dimensions for screw diameters, tap drill sizes, clearance holes for all standard and metric sizes as well as screw head dimensions for pan and button head screws.
Get the PRO version and unlock screw head dimentions for:
* Socket Head Cap Screw
* Round
* Flat
* Hex
* Binder
* Fillister
* Truss
|
[2013-01-26] A Google User: Spam Needs to be a lot more obvioud that this is a crippled version of the app |
|
[2012-09-07] A Google User: Good start But a tolerance dimension for certain dimensions would be nice. For instance, the head diameter on a 1/4" SHCS is closer to 0.370", and is marked as 0.375" maybe tap on the dimension to get a more detailed view? Thanks. |
|
[2012-06-12] A Google User: Simple. Nice and simple. |
|
[2012-04-28] A Google User: Chek Good |
|
[2012-03-24] A Google User: Good app Only suggestion would be to add screw clearances |
|
[2012-03-03] A Google User: Good job! My initial few minutes of looking around in the app, but looks great! |
|
[2012-02-27] A Google User: Lazy How can you do anything with this app when you get 2bolts that's it!!! |
|
[2011-10-08] A Google User: Missing sizes let it down Missing M2.5, M5 , M7 etc and several of the finer pitch metric sizes at M10, M12 and M14 etc. Would buy the Pro version if I felt confident it had comprehensive sizing. |
|
[2011-07-13] A Google User: So handy at work. Just wish it had pipe thread also. |
|
[2011-06-24] A Google User: bed application remove it |
|
[2011-06-24] mayank: bed application remove it |
|
[2011-04-06] A Google User: Not a bad start. The UNC & UNF headings are displaced on my HTC Wildfire. Please add AN bolts & spanner sizes. |
|
[2011-04-06] FlexFlier: Not a bad start. The UNC & UNF headings are displaced on my HTC Wildfire. Please add AN bolts & spanner sizes. |
|
[2011-03-18] A Google User: Free one is to limited and is worthless, pro isn't worth the cost |
|
[2011-03-18] Craig: Free one is to limited and is worthless, pro isn't worth the cost |
|
[2011-03-14] A Google User: Great app - very useful for machine design! The pro version is even better! |
|
[2011-03-14] Mark: Great app - very useful for machine design! The pro version is even better! |
|
|