Популярные бесплатные инструменты в Android Market

RF Signal Tracker (v. 2.5.1)

Ken Hunt опубликовал приложение 2010-07-05
(обновлено 2013-01-12)

The RF Signal Tracker is an engineering application for doing impromptu hand-held drive-tests with your Android phone. You can monitor the RF and WiFi signal strength for the device as well as the serving cell locations and hotspots, describe a cell site's zone of coverage, identify changes in technology and handover points, and save and playback that data. While many of the phone stats in the app can be displayed on the phone already (go to Settings -> About -> Status to see them). The advantage of this app is you can then map, record, and analyze, and share that data in a meaningful way.

App features:
- XY Chart of RF and WiFi signal strength over time.
- Voice notification of signal strength & technology changes, handovers, open hotspots, and more!
- Notes! Insert notes into the RF data collected. Notes can be viewed & edited in Big Picture
- 'Drive Mode' screen showing just RSSI, Cell ID, and technology to view while driving
- Localized for French, Spanish (thank you Augusto!), Portuguese, and German (thank you Lutz!).
- Map and record your color coded RF signal strength as you travel.
- War driving. Collect WiFi access points and list mobile location at the strongest signal.
- Users can redefine site locations on the map.
- Play back, pause, jump to any part of recorded data.
- Share collected data and Maps with Twitter, Facebook, whatever you can share with.
- Sector coverage zones describing sector orientation and beamwidth.
- One Cell Tracking to examine coverage of a single cell site.
- Sound and Vibration notification on handover.
- Possible handoff neighbors (2G).
- User defined sites can be exported or imported for later use.
- Serving cell can be located through Google, OpenCellID.
- All sites located through Google or OpenCellID saved to local database.
- Export recorded data to XML, KML (Google Earth), or CSV files.
- Import older recorded data for playback.
- Roaming and data states, data activity, CGI.
- WiFi MAC address, BSSID, supplicant state.
- WiFi network access points identified.
- EIRP/ERP and Free Space Loss calculators
- Big picture of entire drive test or site survey
- Auto-shutoff at minimum battery level set by user
- Adjust GPS power settings
- App to SD card

Send bug reports to Type1apps@gmail.com (developers rarely read comments...you can't respond to them and they don't contain enough info to act on a problem).

Known Issues:
- If a site appears off the coast of Africa it means that you are using Google's location service or OpenCellID and they cannot determine that cell's location (so it returns the location 0 deg Lat, 0 deg Lon). A new feature for version 2.2.9 is the ability to define your own site locations (add, move or remove) by pressing a spot on the map or a site icon. Users can do their own site surveys as they travel. This is a workaround for those who do not have access to site location data -- unless you are an engineer for a carrier, you won't have access to this data since site locations are generally considered proprietary.

- Background recording, where you exit the app after you start recording, will not register signal strength changes if the phone is in sleep mode (screen is blank). This is a "bug" in Android not the app. If the phone is not allowed to sleep, background recording is possible.

- BER, EVDO, SNR & Ec/Io may display -1. This is the number the Android OS is sending, sorry.

- The app is optimized for GSM service. CDMA devices are not completely supported. This is due to the lack of a CDMA phone (and contract) on my part, not anything specific to the technology. So if you have a CDMA phone be aware it has not been tested by me.

- Please remember you are using a phone, not a laptop. If you try to record hours worth of data, and/or play it back, unexpected things may happen.

Smart Vibrator (for 1.5) (v. 3.6.5)

SmartDog Studio опубликовал приложение 2010-07-05
(обновлено 2013-01-11)

Smart Vibrator is a little program that customizes vibration for incoming SMS and call. You can compose the individual vibration pattern by:
"." Short vibration
"-" long vibration
"_" strong vibration
" " pause 0.5s

* Visit http://smart-dog.appspot.com for detail guide

*Welcome to try my new app "Remote Desktop"

Easy Reminder (v. 1.2.2)

Edges Labs опубликовал приложение 2010-07-05
(обновлено 2011-06-22)

How many times do you not hear the phone?
Thanks to Easy Reminder missed calls and unread messages (SMS/MMS) will no longer be a problem!
With Easy Reminder You can easily set an alert that will be repeated periodically.
Notication is highly configurable and you can also decide a time slot during which You will not be disturbed.

The solution for your missed call and unread sms

Manual on the website.

Dazzle Configurable Switcher (v. 2.9)

Moonblink опубликовал приложение 2010-07-04
(обновлено 2011-06-19)

The ultimate switcher bar for your phone.  Choose from 4 widget sizes, and choose which controls it shows: ringer, sync, WiFi, BT, GPS, airplane, or brightness with min/max/preset (and auto toggle on some phones).

Dazzle is a WIDGET, NOT AN APP: you have to install it on your home page.

Please note that not all features work on all devices, due to operating system or hardware restrictions.

香港通宵交通 (v. 2)

hkmung опубликовал приложение 2010-07-04
(обновлено 2011-06-18)

香港通宵交通 HK Night Traffic

有無試過唔知搭乜野車去你目的地 ?
有無試過趕唔切搭尾班車 ?點返屋企好 ?

此應用程式提供完善的離線香港通宵乘搭資訊
讓大家快速尋找到所需要的資料

還有提醒功能,叫醒到達車站的你

Flashlight (v. 1.13)

J & S опубликовал приложение 2010-07-04
(обновлено 2010-07-04)

Flashlight, keeps screen on at full brightness.

Volume setting[cVolume light] (v. 1.1.0)

Caldroid Asuma опубликовал приложение 2010-07-04
(обновлено 2010-10-16)

cVolume Light version

default phone volumes
1.Incoming call volume
2.Notification volume
3.Music volume
4.Alarm volume
5.Voice Call volume
6.System volume

Ringer mode
1.silent
2.vibrate
3.normal

[ dodol ] PhoneUsage 2.2.1 (v. 2.2.3)

dodol опубликовал приложение 2010-07-03
(обновлено 2010-10-15)

* If you are still using 2.1.x version, you must update to 2.2.1 Critical bugs are fixed.

dodol PhoneUsage provides statistical information about Data, Call, and Message used on your cellphone.

Support widget and notification alarm.

This is similar to 3g WatchDog or Call Meter NG.

Please, report any bug to email.

Wi-Fi scanner wRecX(Free) (v. 5.0.5)

Koichiro Sato опубликовал приложение 2010-07-03
(обновлено 2012-12-26)

The state of Wi-Fi and access point(AP) display.
--
It connects device with the retrieved access point (AP) by the following methods.

<Manual>: The connection is a tap as for the list.
<Auto>: Automatic connection, to configured AP.
<Auto+Open>:<Auto>+Open network.
SSID: Automatic connection, only to specified AP.

---
･When the state of AP changes, the list is automatically updated.

･AP is classified and displayed in the list.
the connected AP is displayed in red, AP that has composed is displayed in blue.

<>Wi-Fi can be turned on and off from MENU.

<>ON/OFF function of APN can be used. (It changes between two APN(s))

<>When APNdroid is installed, a setting of 3G/EDGE/GPRS effective/invalid is possible from the menu. (The setting is unnecessary. )

<> The login function to a provider
A login setup to a network connection donor is possible.

<> The edit function of WifiConfiguration
Edit of all the items containing EnterpriseField is directly possible.

XBMC / Boxee Remote (v. 3.1)

Chandan Pitta опубликовал приложение 2010-07-02
(обновлено 2010-07-02)

PLEASE UNINSTALL v1.0!!!

v3.1
* Profiles support in preferences

v2.2
* Minor bug fix

v2.1
* Minor bug fix to make it work with windows XBMC

v2.0
* Bigger icons
* Use keyboard to enter text
* More buttons
* Bug fixes

v1.0
* Browse videos, music and pictures and corresponding playlists
* Play or queue items in list view