Новые инструменты в Android Market

DrainGuard TRIAL (v. 1.0.8.2)

walda.fx опубликовал приложение 2012-09-23
(обновлено 2012-09-23)

Attention !!
TRIAL Limitations: Only fully functionable from 100-70 % battery.

DrainGuard should help you to watch the consumption in standby. Standby? The time between a ScreenOff and a ScreenOn. DrainGuard informs the user when turning the display on about the battery consumption. This is quite exact configurable, a 2-stage log file is provided if requested, when a too high drain occurs in standby the user is notified, some values can be displayed via minimalisticText widget.

The intelligence of DrainGuard - the special in it:
It would be easy to indicate "only" the difference between ScreenOff and On and would also be not very expressively.

A small example:
Take an average drain in standby of 1% / h.
if you dont use the phone for 5 hours -> 5% of battery consumption
If you use it now for 1h you get ex. +/-15% drain, in the next 1 hour of standby it DOES NOT use ONLY 1% as before, but approx. +/-3-4%. The battery needs apparently "to calm down" for some time again. Thats the 1st point of Drainguard. This "calming down" can be skipped.

Another problem of measurement are the short ScreenOn's. ex. "what's the time?" “have I missed a phone call / SMS?” or a short telephone call etc....
These short breaks would interrupt the measurement which would not be necessary. The 2nd point of DrainGuard: these short ScreenOn's can also be skipped.

The DrainGuard PRO Key app is available in market. Just install it and the TRIAL automatically becomes a FULL Version.

Please try the TRIAL version until you are sure, it works properly on your device!!.

Further details at our homepage!

Information about minimalisticText variables and Permissions at our homepage!

Keywords:
battery drain info akku analyze verbrauch log akustisch warnung statistik stat statistics widget anzeige batterie prozente

DrainGuard PRO Key (v. 1.0)

walda.fx опубликовал приложение 2012-09-23
(обновлено 2012-09-23)

This Key App unlocks the full functionality of DrainGuard. You can not start it, it only has to be installed on your device.

Unlock:
Disable DrainGuard Service, leave Config Dialog, start DrainGuard, enable Service, leave Config Dialog. Done.

Quick Heal MobileSecurity Free (v. 1.01.040)

Quick Heal Technologies America Inc опубликовал приложение 2012-09-23
(обновлено 2012-09-23)

Quick Heal Mobile Security for Android safeguards your Android device from viruses, malwares, malicious applications and personal information loss. This mitigates a considerable amount of risk from the vulnerability that an open platform like Android is prone to. It is a complete security solution that offers a host of features to protect you and your phone from viruses, identity theft, unwanted calls, and text messages. It also helps you locate your stolen or lost phone.

Features:
Virus Protection - Provides automatic real-time virus and spyware scans with optional manual scan. This assures automatic protection from all kinds of malware threats. It also scans applications before those get installed on the mobile. In case you have to use somebody’s memory card then the anti-virus engine scans the memory card first before any data transfer. The intelligent anti-virus automatically updates itself for new virus definitions. The software provides a high degree of flexibility allowing you to use your mobile while the scan runs in the background.  

Call Filtering – This feature enables you to block unwanted calls. It is accentuated by a silent blocking action. It also helps you in configuring a Black List or White list of numbers.

SMS Blocking – With this feature you can silently block unwanted SMSs. You can also scan links in messages and filter infected links.

SMS Spam Protection – You can filter unwanted SMS, block spam SMS text messages from unknown senders and easily configure Black and White lists.

Data Protection - In case the mobile phone is stolen and carries sensitive data, you can:
• Lock the phone access remotely
• Wipe the data remotely by sending predefined SMS
• Configure selective data to wipe-out like Contacts, SMS or folders


Anti-Theft – This powerful feature enables:
• Remote Locking – blocks usages of your phone if it is lost or stolen  
• Mobile Tracking - helps you find your lost or stolen phone
• SIM Change Notification – if the SIM is changed, the new number will be sent to owner’s alternate mobile
• Mobile Lock on SIM Card Change – if your Smartphone's SIM card is removed after it is stolen,  Quick Heal mobile Security for Android will block usage of your mobile phone

The nature of the Android platform makes it one of the most versatile yet most vulnerable to various malwares and data theft.  Try Quick Heal Mobile Security for your mobile phone and experience the security and performance packed in elegantly designed mobile application.

Spin-a-Wind (v. 1.0.2)

Flying Pilot Software LLC опубликовал приложение 2012-09-23
(обновлено 2012-09-23)

This application is a pilot's tool.  It easily breaks down the runway wind into headwind and crosswind components.  Pages are also available to convert temperature from celsius to fahrenheit, calculate windchill factor, heat index, pressure altitude, density altitude, for both moist and dry air, true airspeed (TAS) mach number and speed of sound.  It's easy to use with spinning reels to input data, which is instantly calculated and displayed.
The calculator enhances, but legally cannot replace your approved paper charts and E6B -- for takeoff and landing, your legal performance procedures must be used.  But, if the winds are strong, you can refine your calculations with Spin-a-Wind!

Some notes on Spin-a-Wind:
- For wind calculations, all values are rounded to the most conservative value, rounded up for crosswinds and tailwinds, and rounded down for headwinds.  For instance, if the tailwind calculated to 9.1, then 10 will be displayed.  If the headwind calculated to 5.8, then 5 will be displayed.

If you are testing for zero in the altitude page, then understand that standard day, the pressure is actually 29.921 inches of mercury or 1013.2mb or hPa., so the calculator will not read zero altitude for 29.92 inHg or 1013 mb.

Togo Converter Number (v. 1.0)

Hovi Kokouvi Edem Amen опубликовал приложение 2012-09-23
(обновлено 2012-09-23)

Vous permet de mettre à jour vos contacts sur le téléphone suivant le nouveau plan de numérotation du TOGO en vigueur depuis le 7 Août 2011.
Les formats pris en compte sont :
00228xxxxxxx ; +228xxxxxxx ; xxxxxxx  .
Tous les types d’opérateurs sont pris en Compte ( MOOV , TOGOCEL , ILLICO , TOGO TELECOM ) .
Ps: Importer les contacts de la SIM vers le Téléphone avant d'appliquer le plan de numérotation .

AutoFlight Lite (v. 1.1.5)

Labs Adelya опубликовал приложение 2012-09-23
(обновлено 2012-09-23)

Cette application va permettre de choisir une heure d'entrée en mode avion ainsi que son heure de sortie.
Fini les réveils par une notification, vous pourrez dormir tranquillement et, surtout, vous économiserez énormément de batterie !
Vous êtes en soirée et vous ne souhaitez pas passer en mode avion? Pas de problème, l'application affiche une popup qui demande si le téléphone doit passer en mode avion ou pas. Au delà d'un délai de 1 minute, si aucune réponse n'a été fournie, l'application passe automatiquement en mode avion.
Vous pourrez aussi configurer si vous voulez que le téléphone vibre ou qu'il émette un son lorsqu'il passe ou qu'il sort du mode avion.


** ChangeLog 1.1.5 **
- Ajout de l’internationalisation de l'application (Anglais, Français avec Anglais par défaut)

** ChangeLog 1.1.4 **
- Ajout de la fonctionnalité "+ 5 minutes" lors de la demande de passage en mode avion

** ChangeLog 1.1.3 **
- Ajout de la fonctionnalité de sélection des jours pour la mise en mode avion
- Correction Bug sur le vibreur

** ChangeLog 1.1.2 **
- Ajout d'une configuration sur la durée de vibration
- Ajout d'une page Log répertoriant toutes les confs

** ChangeLog 1.1 **
Nouvelles fonctionnalités de cette version :
- Sélection de l'heure d'entrée en mode avion
- Sélection de l'heure de sortie
- Configuration du son et du vibreur
- Possibilité de désactiver AutoFlight
- Possibilité de partager l'application par tous les moyens de communication

パスワード帳 (v. 1.7)

Permission Inc. опубликовал приложение 2012-09-23
(обновлено 2012-09-23)

各種パスワードや銀行口座情報など、忘れてしまいがちな情報を保存して一括管理できる便利な日本製アプリです。

WEBサイトのログイン情報、銀行口座、クレジットカード、免許証、メンバーズカードなど日本人の生活にマッチした情報を管理できます。

また、情報は端末に保存しサーバーとの通信は一切行わないためセキュリティ面も万全です。

-----------------------------------------------------
本アプリの提供元である「株式会社パーミッション」は、社団法人情報サービス産業協会（JISA）より、個人情報の適切な取扱いを行う事業者に付与されるプライバシーマークの付与認定を受けています。

審査合格年月日：平成23年10月5日
審査合格番号：17000909(01)
許諾期間：平成23年10月5日から平成25年10月4日
-----------------------------------------------------

Pansi SMS Japanese language (v. 1.9)

Pansi Studio опубликовал приложение 2012-09-23
(обновлено 2012-09-23)

Japenese language pack for Pansi SMS.
Install it and Pansi will speak in Japenese if your system language is set as Japenese.

This plugin works with Pansi SMS 1.4 and above.

iMon (v. 1.0.1)

Layne Lee опубликовал приложение 2012-09-23
(обновлено 2012-09-23)

iMon allows you to access and live monitor your DVRs in real H.264 video streaming over network.

aTorrent PRO (v. 1.6.4)

Mobilityflow Torrents опубликовал приложение 2012-09-23
(обновлено 2012-09-23)

aTorrent PRO - Native P2P BitTorrent Software for Android devices. Download files with ease right to your phone or tablet!
Professional (Ad-free) version.

Features:
* Torrent search dialog
* Open torrents right from browser
* Magnet links support
* Add torrent from file
* Choose download folder
* Partial download (choose files from torrent)
* Multiple parallel downloading
* Option to limit downloads by Wi-Fi
* Option to pause downloads when external power supply is not connected
* Supported protocols: BitTorrent P2P, DHT, Advanced DHT Bootstrap, Magnet links, HTTP & UDP Trackers

Coming soon:
* Many other features in development.