Популярные в категории 'Производительность' в Android Market

sms2cal (v. 0.3.4)

pep at spanishcoders.com опубликовал приложение 2010-09-30
(обновлено 2011-05-10)

** DISCONTINUED ** Android 4.0 / ICS not supported.

Backup your new incoming sms automatically in your google calendar (each sms in its current date and hour)! No adds!

If the app doesn't detect your google close the app and open it again.

Dont forget rating!

Network/Bluetooth GPS (v. 3.0.0)

IdeaSynthesis LLC опубликовал приложение 2010-09-30
(обновлено 2012-10-24)

*** DOES NOT WORK WITH Nexus 1 RUNNING GINGERBREAD DUE TO GPS ERROR: http://code.google.com/p/android/issues/detail?id=15500 ***
SolidSync Network/Bluetooth GPS turns your Android-powered mobile phone into a Bluetooth GPS receiver using the Android GPS and Bluetooth systems.

It creates a Bluetooth serial port and then sends GPS NMEA data to any compatible Bluetooth-enabled or network enabled device: this could be a laptop or desktop computer, or even another phone!

See http://solidsync.com/bluetoothgps for more details and to review the help guide.

Using SolidSync Network/Bluetooth GPS you can connect another Bluetooth-enabled or network-enabled device (for example, a desktop or notebook computer or even another cellular phone) to your Android device and use your Android device as a location data source.

- See the current location information in a simple display.
- Make GPS data available to any other device that can receive GPS data over a Bluetooth serial connection.
- Make the GPS data available to any other device that can receive GPS data over a TCP/IP network connection, and manage connected clients.
- Configurable update intervals.
- Run the service in the background
- Control which NMEA messages get transmitted.
- Replay trips saved with SolidSync Trip Tracker.
- Tested with applications including ESRI's ArcGIS, Wireless InSSIDer, Google Earth, and others.

Release 2.6.0
# Minor bug fixes
# User interface upgrades to better support trip replay functionality
# Documentation upgrades

Cpu Info (v. 1.1.4)

Loopbot.org опубликовал приложение 2010-09-29
(обновлено 2010-09-29)

This App aims to monitor phones cpu usage in the fastest and the lightest and least resource usage possible way.
-CPU BENCHMARK
-SHOWS CPU USAGE ON STATUS BAR
-Actual Total Cpu Usage
-Android Linux Cpu Loads Avg
(cat /proc/loadavg)
-Last 1min,5mins,15mins
Cpu Load
-Refresh Rate Settings
-On/Off Buttons

ShutUpBatterySaver (v. 0.1)

wjaxEngineering опубликовал приложение 2010-09-29
(обновлено 2010-09-29)

It allows to set a specific Autosync ON - OFF period.

It also allows to disable Autosync and/or APN based on Signal Strength of your CDMA/GSM network.

IMPORTANT:
1. Dont kill it! And exclude it from any memory saver/automatic task killer
2. Only works on Android 2.1 or greater

Just a proof of concept... more to come!

Mini Spanish Dictionary (v. 2.0)

Md. Waliul Islam Mondal опубликовал приложение 2010-09-29
(обновлено 2010-09-29)

a. Total 8000 words.
b. Meanings appear as you type.
c. Bookmark support
d. Add new word support
e. Tap on the "Tap Here" field for onscreen keyboard.
f. For full functionality, you have to register.

noomNotes (v. 1.1)

noomSoft опубликовал приложение 2010-09-29
(обновлено 2012-10-20)

A quick and simple notes/task list. Ability to set reminder date/time for note, and priority.

Къде паркирах ? (v. 1.0)

Galin Stanev опубликовал приложение 2010-09-29
(обновлено 2010-09-29)

"Къде паркирах ?" е приложение, което запомня координатите на мястото, където сте паркирали автомобила си. Във всеки следващ момент можете да видите на картата текущото си местоположение и мястото на което сте паркирали. Показва примерен път за достигане до автомобила, както и разстоянието до него.

FX-602P scientific calculator (v. 5.0(4))

Martin Krischik опубликовал приложение 2010-09-29
(обновлено 2012-10-20)

FX-602P Simulator is a very precise simulation of the classic  FX-602P programmable calculator and and all it's accessories. This simulation is not a toy but but a full features simulations of almost functionality of the original calculator and it can be used as a full featured and fully programmable scientific calculator.

Used as a calculator the FX-602P simulator will exceed most other calculator available. The FX-602P simulator supports all arithmetic, trigonometric, logarithmic, hyperbolic, statistical functions and all alphanumeric display options of the original calculator.

And last not least the FX-602P simulator is fully programmable. You can write up to 10 programs, using 110 registers.

With the build in FA-2 cassette interface simulation you can save and load programs and data to your thump drive for later use. Or printout results with the FP-10 thermal printer simulation and then copy / paste them to other applications.

Do visit our FX-602P website or blog where you can download the original Manual of the Calculator. Remember that the Market-Comments have no answer function and I can't help you if you post there.

SUPPORTED ANDROID FUNCTIONS:

• Calculation results can be copies to the clipboard.
• Can be installed on the SD-Card.
• Participates in Androids build in backup and restore.
• Honeycomb Tablet compatible.
• Extra Printer for Honeycomb Tablets (visit our web-page for screen shot).

BASIC FEATURES:

• Specification:Arithmetic operations (addition, subtraction, multiplication and division, raising to power and root – all judging the priority of operations) negative umbers, exponent, 33 parentheses at 11 levels and constant operations.

• Scientific Functions: Trigonometric and inverse trigonometric functions (with angle in degrees, radians or gradients), hyperbolic and inverse hyperbolic functions, logarithmic and exponential functions. inverse. Factorial, square root, square, decimal ⇔ Hour, Minute, Second conversion, coordinate transformation, absolute value, removing integer part, removing faction part, percentage, random numbers, π.

• Statistical functions Standard deviation (2 kinds), mean, sum, square sum, number of data.

• Memory: 5 key independent memory 11 ~ 110 register (non-volatile).

• Range of number: ± 1 × 10⁻⁹⁹ to ± 9.999999999 × 10⁹⁹ and 0, internal operations use 18 digits mantissa.

• Decimal Point Full decimal floating point arithmetic with underflow (possible display of engineering decimals).

PROGRAMMING FEATURES:

• Number of Steps: 999 steps (non-volatile)

• Jumps: Unconditional jump (GOTO), up to 10 pairs, condition jump (x=0, x≥0, x=F, x≥F), count jump (ISZ, DSZ), subroutine (GSP) up to 9 subroutines, up to 9 depths.

• Number of programs storable: Up to 10 (P0 to P9)

• Checking and Editing Functions Check, debug, deletion addition, etc.

• Indirect addressing for M-register, destination of jump, calling subroutines.

• Miscellaneous functions: Manual Jump (GOTO), temporary suspension of execution (PAUSE), command code and step number displayed during check, Simulated FA-2 adaptor for Record and File I/O (please note that the later needs Java security authorisation).

DEVICE COMPATIBILITY:

The application in written in device independent and should run on most Android devices. There is also a desktop version available on request (please include your purchasing informations).

PERMISSIONS:

• WRITE_EXTERNAL_STORAGE: Used to save and load programm state. Only the directory set in the preferences is accessed.

Smart Money (v. 1.0)

Free Idea Studio опубликовал приложение 2010-09-27
(обновлено 2010-09-27)

A smart money management tool, which can recognize credit card confirmation text message and insert income data periodically and automatically.

Wrap Tool (v. 1.1)

Arrowpoint Corporation опубликовал приложение 2010-09-27
(обновлено 2010-09-27)

The WRAP Tool is designed as an aid to assist Government Contractors in determining bid rates for future government pricing. It is based on standard DCAA costing principles in which you simply add your organization's fringe, overhead, G&A and desired fee and it will compute the rest.